Abstract:This study established a complete heat transfer prediction model that integrates four heat transfer sub-models, including contact heat conduction, gas film heat conduction, heat radiation, and heat convection, along with an artificial softening correction based on combined approach of computational fluid dynamics and discrete element method (CFD-DEM). The model's precision was confirmed by experimental results with relative errors below 5 %. The discussion on the heat flux contributions of the above four heat transfer mechanisms shows that with an initial particle temperature of 200°C, tube wall temperature of 30°C, and particle descent velocity of 1.3 mm/s, gas film conduction heat flux is the primary contributor to the total tube wall heat flux at 60.5 %, followed by radiation heat flux (19.5 %), contact conduction heat flux (12.1 %), and convection heat flux (7.9 %). Besides, the presentation of physical fields related to particles and the fluid showcases the model's capability in elucidating the heat and mass transfer characteristics of the particle–fluid-wall system within tubular MBHEs. Furthermore, a local nominal range sensitivity analysis, along with a study of factors' influence rules, was performed to quantify the effects of the 8 key model parameters on heat transfer results. The analysis indicates that fluid thermal conductivity is the predominant factor with its nondimensionalized first-order sensitivity coefficient of 54.9 %, succeeded by particle-to-wall angle factor (15.4 %), wall emissivity (14.4 %), gas film thickness (9.6 %), wall thermal conductivity (2.3 %), wall roughness (-1.6 %), particle Young's modulus (-1.4 %), and particle specific heat capacity (0.4 %). Finally, their impacts on the heat prediction results were presented in detail.

Investigation on the Heat Transfer Model of the External Heat Exchanger of Circulating Fluidized Bed Boilers

Investigation on Heat Transfer Performance of External Heat Exchanger for Circulating Fluidized Bed Boiler

The Study of Unified Thermal Calculation Model of Circulating Fluidized Bed Boiler Based on Experience

Research on the Heat Transfer Model of Platen Heating Surface of 300 Mw Circulating Fluidized Bed Boilers

Heat transfer characteristics of fluidized bed heat exchanger in a 300MW CFB boiler

Heat Transfer in a Large-Scale Circulating Fluidized Bed Boiler

Experimental Investigation and Model Validation of the Heat Flux Profile in a 300 MW CFB Boiler

Development of a New External Heat Exchanger for a Circulating Fluidized Bed Boiler

Modeling of Circulating Fluidized Bed Boiler Performance

Numerical Investigation of the Effect of the Location of an Immersed Tube in a Fluidized Bed on Heat Transfer of Surface-to-bed

Calculation of Heat Transfer in Furnace of a Circulating Fluidized Bed Boiler

Research on Thermal Characteristics of 300MW Circulating Fluidized Bed Boilers

12th International Conference on Fluidized Bed Technology OPERATION CHARACTERISTICS OF EXTERNAL HEAT EXCHANGERS IN THE 600MW SUPERCRITICAL CFB BOILER

Heat Transfer Coefficient Calculation of a Circulating Fluidized Bed Boiler for Different Operating Modes

A comprehensive heat transfer prediction model for tubular moving bed heat exchangers using CFD-DEM: Validation and sensitivity analysis

Modeling of a 300 MW Circulating Fluidized Bed Boiler

An experimental and simulation investigation into the energy balance and material balance characteristics in a fluidized bed heat exchanger

Thermal-hydraulic Calculation and Analysis on Evaporator System of a 660 MWe Ultra-Supercritical CFB Boiler

The Heat Transfer Coefficients of the Heating Surface of 300 MWe CFB Boiler

Heat Flux Distribution on Circulating Fluidized Bed Boiler Water Wall

Investigation of Heat Transfer in a Large-Scale External Heat Exchanger with Horizontal Smooth Tube Bundle