Abstract:In the field of waste heat recovery, tubular moving bed heat exchangers (MBHEs) hold great promise as equipment capable of effectively handling large-sized granular materials with high temperature. To further clarify the heat and mass transfer characteristics within tubular MBHEs, this study firstly conducted detailed investigations on the contributions of different heat transfer mechanisms. The result shows that heat radiation (∼45%) and gas film heat conduction (∼42%) control the heat transfer processes involving tube walls, with an inlet particle temperature of 600 °C, tube wall temperature of 50 °C, and particle descent velocity of 2 mm/s. These contributions can be influenced by the inlet particle temperature and the tube wall temperature, rather than the particle descent velocity. Additionally, for a specific particle, its heat transfer state is highly depended on where it is located. Subsequently, the time-varying and space-varying characteristics of the heat transfer processes involving tube walls are studied. The results suggest that the time-varying and space-varying characteristics are inherent in tubular MBHEs due to the difficulty to achieve complete stability. Meanwhile, temporal fluctuations intensify with an increase in the inlet particle temperature, a decrease in wall temperature, or an increase in particle descent velocity. The result of power spectral density (PSD) indicates that the heat transfer processes exhibit a degree of chaotic behavior due to the nonlinear property of sub-models, as well as the randomness in particle feeding and contacts. The space-varying characteristic is mainly determined by the inlet particle temperature and the tube wall temperature, rather than the particle descent velocity. This characteristic can be observed in both the axial and circumferential directions, with the circumferential variation being more pronounced than the axial variation. Furthermore, a double-tube MBHE, a topic that has received scant attention in previous research, is investigated in comparison to a single-tube MBHE to explore the differences in heat and mass transfer between the two configurations. It indicates that under the same boundary conditions, there are differences in heat transfer results, which are attributed to the interactions between two vertically arranged tubes. These interactions are reflected in the reconstruction of particle flow patterns and the effect altering the temperature distribution for the particles or fluid surrounding the tubes. The obtained results provide valuable insights into the mass and heat transfer behaviors of particles and fluids within tubular MBHEs, laying a foundation for advancing the development of efficient tubular MBHEs.

Numerical Investigation of the Effect of the Location of an Immersed Tube in a Fluidized Bed on Heat Transfer of Surface-to-bed

Effects of tube configurations on the heat transfer and hydrodynamic behavior in a gas-solid fluidized bed

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Simulation Study on Heat and Mass Transfer Characteristics Within Tubular Moving Bed Heat Exchangers

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

An experimental and simulation investigation into the energy balance and material balance characteristics in a fluidized bed heat exchanger

Experimental Study on Local Heat Transfer and Hydrodynamics with Single Tube and Tube Bundles in an External Heat Exchanger

Experimental Study of Solid Circulation Rate and Pressure Distribution Characteristics in a Cold Fluidized Bed with an External Heat Exchanger in an Municipal Solid Waste Incinerator

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Experimental Study on the Heat Transfer Coefficient Between A Freely Moving Sphere and A Fluidized Bed of Small Particles

Investigation on Heat Transfer Performance of External Heat Exchanger for Circulating Fluidized Bed Boiler

Development of a New External Heat Exchanger for a Circulating Fluidized Bed Boiler

An Experimental and Theoretical Investigation into the Heat Transfer of A Finned Water Wall Tube in A Circulating Fluidized Bed Boiler

Heat transfer in circulating fluidized bed and its modeling

Factors Affecting the Heat Transfer in a Circulating Fluidized Bed Boiler

Measurement of Heat Transfer in a 465t/h Circulating Fluidized Bed Boiler

Heat Flux Determination Based on the Waterwall and Gas–solid Flow in a Supercritical CFB Boiler

Heat transfer characteristics of fluidized bed heat exchanger in a 300MW CFB boiler

Investigation on the Heat Transfer Model of the External Heat Exchanger of Circulating Fluidized Bed Boilers