Abstract:To better deal with the radioactive iodine generated during the development of nuclear energy, B2O3, Bi2O3, ZnO, and SiO2 were used to sinter borosilicate glass for the immobilization of iodine. The effect of B2O3 on glass formation was discussed by changing the molar ratio of B2O3 in the matrix. When B2O3 content is 50 mol% and sintering temperature is 600 ℃, the amorphous degree of quaternary glass is the highest. The sintered body with the highest degree of amorphous was selected to study radioactive iodine. Then, the effects of different iodine loading concentrations for sintering borosilicate glass in terms of microstructure and phase change were discussed. With the increase in iodine content on silica-gel, the degree of amorphous of the specimens presented a decreasing trend, and there are obvious SiO2 peaks. When the content was 20 wt.%-30 wt.%, a large number of new phases were generated. When the iodine content is 20 wt.%, in addition to the enrichment of Si and O elements, the elemental distribution for B, Bi, Zn, I, and Ag was even. TEM results also showed that there was a crystalline phase in the sinter.

Performance research and engineering application of B2O3-Bi2O3-ZnO glass powder for solidifying iodine-containing silver silica gel

Sintering Bi2O3–B2O3–ZnO Ternary Low Temperature Glass by Hydration Device to Solidify Iodine Containing Silver-Coated Silica Gel

B2O3–Bi2O3–ZnO based materials for low-sintering temperature immobilization of iodine adsorbed waste

Direct Immobilization of Iodine-Loaded Silver-Coated Silica Gel with Silicate Glass Powders at Low Temperature

Synthesis of glass composite material with bismuthate glass powder and zeolite-4A for immobilization of iodine waste

Bi2O3 doped B2O3-ZnO glass powder for immobilization of radioactive iodine waste at low temperature

Low-sintering-temperature borosilicate glass to immobilize silver-coated silica-gel with different iodine loadings

Immobilization of Iodine Waste Forms: A Low-Sintering Temperature with Bi2O3-B2O3-ZnO Glass

Role of amorphous silica gel in B2O3-Bi2O3-ZnO-SiO2 to immobilize iodine waste

Application of silica gel to immobilise iodine waste by low-temperature sintering

The immobilization on various concentrations of iodine in silver-coated silica gel via B2O3–Bi2O3 based material

Low-temperature fabrication of glass-based iodine waste forms via a novel preparation method

Immobilization of iodine waste at low sintering temperature: Phase evolution and microstructure transformation

Novel Method for Efficient Solidification the Iodine Contained Waste by B2O3–Bi2O3 Glass Powder at Very Low Temperature

Utilization of B 2 O 3 –Bi 2 O 3 –ZnO low-temperature glass-ceramics to immobilize iodine-loaded silver-coated silica-gel

High Retention Immobilization of Iodine in B-Bi-Zn Oxide Glass Using Bi2O3 As a Stabilizer under a N2 Atmosphere

Immobilization of iodine waste via the gas-pressure sintering of glass-bonded iodosodalite ceramic

Boron Assisted Low Temperature Immobilization of Iodine Adsorbed by Silver-Coated Silica Gel

High Retention Immobilization of Iodine in B-Bi-Zn Oxide Glass Using Bi 2 O 3 as a Stabilizer under a N 2 Atmosphere

Immobilization of iodine waste via moderate temperature sintering of (Ag)iodosodalite

Immobilization of silver-coated silica gel with varying iodine loading in silicate glass ceramics