Abstract:Glass-bonded sodalite composite waste forms have been developed for the immobilization of liquid radioactive wastes resulting from off-gas treatment during aqueous reprocessing of used nuclear fuel, with a particular focus on 129 I. The proposed composite waste form is comprised of aluminosilicate ceramic phases containing volatile radionuclides bonded with a glassy matrix. In this work, a suite of ten candidate low-temperature glass binders (ZnO-Bi 2 O 3 -based glasses and a Na 2 O-B 2 O 3 -SiO 2 glass) were examined. Six glasses were mixed with caustic scrubber waste simulant previously converted into a sodalite-rich material (to provide glass fractions of 10 and 20 wt.%), uniaxially pressed into pellets, and sintered at 350°C or 550°C for 8 h in air. Iodine retention after heat treatment was assessed by neutron activation analysis, showing retention of 67-100% of expected iodine. The aqueous durabilities of the resulting materials were then determined, following the ASTM C1308 standard test, showing iodine releases of 1 to 23 g·m −2 after 4 d. The cumulative iodine release for the best performing system (a zinc-bismuth-borate glass binder) was <1 g·m −2 , and its iodine retention from processing was 67%. The iodine releases compared favorably with other waste forms. In parallel, this best-performing composition was also consolidated via hot isostatic pressing (HIP) in a stainless-steel canister at 550°C for 2 h under 100 MPa pressure. The HIPed sample was produced at the ∼20 g scale and showed improved densification and minimal reaction with the canister.

Novel Method for Efficient Solidification the Iodine Contained Waste by B2O3–Bi2O3 Glass Powder at Very Low Temperature

Bi2O3 doped B2O3-ZnO glass powder for immobilization of radioactive iodine waste at low temperature

B2O3–Bi2O3–ZnO based materials for low-sintering temperature immobilization of iodine adsorbed waste

Low-temperature fabrication of glass-based iodine waste forms via a novel preparation method

Performance research and engineering application of B2O3-Bi2O3-ZnO glass powder for solidifying iodine-containing silver silica gel

Sintering Bi2O3–B2O3–ZnO Ternary Low Temperature Glass by Hydration Device to Solidify Iodine Containing Silver-Coated Silica Gel

Synthesis of glass composite material with bismuthate glass powder and zeolite-4A for immobilization of iodine waste

High Retention Immobilization of Iodine in B-Bi-Zn Oxide Glass Using Bi2O3 As a Stabilizer under a N2 Atmosphere

Immobilization of Iodine Waste Forms: A Low-Sintering Temperature with Bi2O3-B2O3-ZnO Glass

Role of amorphous silica gel in B2O3-Bi2O3-ZnO-SiO2 to immobilize iodine waste

Direct Immobilization of Iodine-Loaded Silver-Coated Silica Gel with Silicate Glass Powders at Low Temperature

Application of silica gel to immobilise iodine waste by low-temperature sintering

Immobilization of iodine waste at low sintering temperature: Phase evolution and microstructure transformation

Immobilization of iodine waste via the gas-pressure sintering of glass-bonded iodosodalite ceramic

Low-sintering-temperature borosilicate glass to immobilize silver-coated silica-gel with different iodine loadings

High Retention Immobilization of Iodine in B-Bi-Zn Oxide Glass Using Bi 2 O 3 as a Stabilizer under a N 2 Atmosphere

Glass-bonded ceramic waste forms for immobilization of radioiodine from caustic scrubber wastes

The immobilization on various concentrations of iodine in silver-coated silica gel via B2O3–Bi2O3 based material

Vitrification of lead–bismuth alloy nuclear waste into a glass waste form

Immobilization of Iodine Waste in B2O3–Bi2O3–ZnO Based Materials: Maximum Solid Solubility

Bismuth Coordinates with Iodine Atoms to Form Chemical Bonds for Existing Stabilization in Boron Glass