Abstract:Glass-bonded sodalite composite waste forms have been developed for the immobilization of liquid radioactive wastes resulting from off-gas treatment during aqueous reprocessing of used nuclear fuel, with a particular focus on 129 I. The proposed composite waste form is comprised of aluminosilicate ceramic phases containing volatile radionuclides bonded with a glassy matrix. In this work, a suite of ten candidate low-temperature glass binders (ZnO-Bi 2 O 3 -based glasses and a Na 2 O-B 2 O 3 -SiO 2 glass) were examined. Six glasses were mixed with caustic scrubber waste simulant previously converted into a sodalite-rich material (to provide glass fractions of 10 and 20 wt.%), uniaxially pressed into pellets, and sintered at 350°C or 550°C for 8 h in air. Iodine retention after heat treatment was assessed by neutron activation analysis, showing retention of 67-100% of expected iodine. The aqueous durabilities of the resulting materials were then determined, following the ASTM C1308 standard test, showing iodine releases of 1 to 23 g·m −2 after 4 d. The cumulative iodine release for the best performing system (a zinc-bismuth-borate glass binder) was <1 g·m −2 , and its iodine retention from processing was 67%. The iodine releases compared favorably with other waste forms. In parallel, this best-performing composition was also consolidated via hot isostatic pressing (HIP) in a stainless-steel canister at 550°C for 2 h under 100 MPa pressure. The HIPed sample was produced at the ∼20 g scale and showed improved densification and minimal reaction with the canister.

Immobilization of iodine waste via the gas-pressure sintering of glass-bonded iodosodalite ceramic

Immobilization of iodine waste via moderate temperature sintering of (Ag)iodosodalite

Immobilization of iodine waste at low sintering temperature: Phase evolution and microstructure transformation

Synthesis of glass composite material with bismuthate glass powder and zeolite-4A for immobilization of iodine waste

Application of silica gel to immobilise iodine waste by low-temperature sintering

Immobilization of Iodine Waste Forms: A Low-Sintering Temperature with Bi2O3-B2O3-ZnO Glass

Low-temperature fabrication of glass-based iodine waste forms via a novel preparation method

Glass-bonded ceramic waste forms for immobilization of radioiodine from caustic scrubber wastes

B2O3–Bi2O3–ZnO based materials for low-sintering temperature immobilization of iodine adsorbed waste

Role of amorphous silica gel in B2O3-Bi2O3-ZnO-SiO2 to immobilize iodine waste

The immobilization on various concentrations of iodine in silver-coated silica gel via B2O3–Bi2O3 based material

Performance research and engineering application of B2O3-Bi2O3-ZnO glass powder for solidifying iodine-containing silver silica gel

Bi2O3 doped B2O3-ZnO glass powder for immobilization of radioactive iodine waste at low temperature

High Retention Immobilization of Iodine in B-Bi-Zn Oxide Glass Using Bi 2 O 3 as a Stabilizer under a N 2 Atmosphere

Direct Immobilization of Iodine-Loaded Silver-Coated Silica Gel with Silicate Glass Powders at Low Temperature

Sintering Bi2O3–B2O3–ZnO Ternary Low Temperature Glass by Hydration Device to Solidify Iodine Containing Silver-Coated Silica Gel

Low-sintering-temperature borosilicate glass to immobilize silver-coated silica-gel with different iodine loadings

Novel Method for Efficient Solidification the Iodine Contained Waste by B2O3–Bi2O3 Glass Powder at Very Low Temperature

Immobilize Nd2O3 as simulated nuclear waste in silicate-apatite glass-ceramics

The effects of dry grinding and wet grinding on synthesizing iodosodalite

Treatment of zeolite adsorbed material as a potential nuclear waste glass-ceramic matrix