Low-sintering-temperature borosilicate glass to immobilize silver-coated silica-gel with different iodine loadings
Yi Liu,Bingsheng Li,Xiaoyan Shu,Zhentao Zhang,Guilin Wei,Yi Liu,Shunzhang Chen,Yi Xie,Xirui Lu
DOI: https://doi.org/10.1016/j.jhazmat.2020.123588
IF: 13.6
2021-02-01
Journal of Hazardous Materials
Abstract:<p>To better deal with the radioactive iodine generated during the development of nuclear energy, B<sub>2</sub>O<sub>3</sub>, Bi<sub>2</sub>O<sub>3</sub>, ZnO, and SiO<sub>2</sub> were used to sinter borosilicate glass for the immobilization of iodine. The effect of B<sub>2</sub>O<sub>3</sub> on glass formation was discussed by changing the molar ratio of B<sub>2</sub>O<sub>3</sub> in the matrix. When B<sub>2</sub>O<sub>3</sub> content is 50 mol% and sintering temperature is 600 ℃, the amorphous degree of quaternary glass is the highest. The sintered body with the highest degree of amorphous was selected to study radioactive iodine. Then, the effects of different iodine loading concentrations for sintering borosilicate glass in terms of microstructure and phase change were discussed. With the increase in iodine content on silica-gel, the degree of amorphous of the specimens presented a decreasing trend, and there are obvious SiO<sub>2</sub> peaks. When the content was 20 <em>wt.</em>%-30 <em>wt.</em>%, a large number of new phases were generated. When the iodine content is 20 <em>wt.</em>%, in addition to the enrichment of Si and O elements, the elemental distribution for B, Bi, Zn, I, and Ag was even. TEM results also showed that there was a crystalline phase in the sinter.</p>
environmental sciences,engineering, environmental