Adiabatic shear behavior and cutting force prediction modeling of FV520B steel
Longyun Yang,Chunzheng Duan,Yang Wang,Zhaocheng Wei,Minjie Wang
DOI: https://doi.org/10.1007/s00170-023-12570-z
IF: 3.563
2023-11-05
The International Journal of Advanced Manufacturing Technology
Abstract:FV520B steel is a challenging metal to machine, often exhibiting adiabatic shear behavior during cutting, which leads to the formation of serrated chips. Serrated chips not only cause fluctuations in cutting forces, resulting in a loss of cutting accuracy, but also contribute to rapid tool wear. Therefore, it is crucial to understand the evolution of serrated chips during the cutting process and establish an accurate cutting force model. In this study, we established the serrated chip deformation coefficient and serration factor to analyze the changes in chip morphology based on cutting speed, uncut chip thickness, and tool rake angle. Additionally, a cutting force prediction model was developed using the Johnson–Cook constitutive model, taking into account adiabatic shear damage, and the cutting temperature model proposed by Huang and Liang. The research results found that the serration degree of FV520B steel chips gradually becomes severe with increasing cutting speed, increasing uncut chip thickness, and decreasing tool rake angle. The average errors in predicting cutting forces in the X , Y , and Z directions were 10.3%, 10.5%, and 10.9%, respectively, with maximum errors of 15.5%, 13.4%, and 14.0%. The effect of cutting parameters on F X and F Y can be summarized as follows: axial cutting depth > feed per tooth > spindle speed. The effect on F Z can be described as: spindle speed > axial cutting depth > feed per tooth.
engineering, manufacturing,automation & control systems