Modeling Analysis of Abrasive Wear

Yongqiang ZHANG,Jiugen WANG,Yufang HONG

DOI: https://doi.org/10.3969/j.issn.0254-0150.2017.11.003

2017-01-01

Abstract:Abrasive wear is a major mechanism that affects the service lives of machines.For the ploughing wear mechanism,the wear debris is modeled respectively with spherical,conical and frustum with spherical tip particles to study the wear rate and friction coefficient of abrasive wear.With the consideration of the change of number of wear debris with particle size,the relationship between wear rate and debris amount and its size was analyzed,and the changes of the value of mean friction coefficient with debris number and its geometry parameters were computed.The results demonstrate that the wear rate of the spherical abrasive model is decreased with the decreasing of particle size and the increase of particle number,and its friction coefficient is increased with the increasing of particle number.The wear rate of the conical abrasive model is increased with the increasing of particle size and its number,and its friction coefficient is increased with the increasing of conical angle.The change trend of wear rate of the cone abrasive model is the same as that of spherical abrasive model,however the changing of its friction coefficient is in the opposite way.