Abstract:Owing to heavy dynamic and thermal loads, PCBN tools are seriously worn during hard cutting, which largely constrains the improvement of their machining performance. Therein, the chamfered structure of a cutting edge has a notable influence on the tool wear. Thus, a comparative study was carried out on the wear morphology and wear mechanism of PCBN tools with either a variable chamfered edge or an invariable chamfered edge. The results indicate that, for a PCBN tool with a variable chamfered edge, the rake wear area is far from the cutting edge and slowly extends toward it. A shallow large-area crater wear occurs on the rake face, and the flank wear area has a long triangular shape with a smaller wear area and width, and the cutting edge remains in a good state during the cutting process. In contrast, for a PCBN tool with an invariable chamfered edge, a deep small-area crater appears on the rake face, and the wear area is close to the cutting edge and quickly extends toward it. Thus, it is easy for chips to accumulate in the crater, resulting in large-area and high-speed wear on the flank face. In addition, the tool shows a weak wear resistance. In the initial wear stage, the rake wear mechanism of the two cutting tools is a mixture of abrasive, oxidation, and other types of wear, whereas their flank wear mechanism is dominated by abrasive wear. With an aggravation of the tool wear, the oxidation and diffusion wear mechanism are both increasingly strengthened. The rake wear of the cutter with a variable chamfered edge showed an obvious increase in the oxidation and diffusion wear, as did the flank wear of the cutter with an invariable chamfered edge. This study revealed the wear mechanism of the PCBN tool with a variable chamfered edge and provided theoretical and technological support for its popularization and application in the machining of high-hardness materials.

Study of the influence of cutting parameters on tool wear and the state of the machined surface

Tool Wear Prediction Model Based on Wear Influence Factor

Study on the Mechanisms and Simulation of the Tool Wear Process in Machining of Stainless Steels with Carbide Tools

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Tool Wear Condition and Optimization During Cutting Process

Enhancing the Machining Performance by Cutting Tool Surface Modifications: a Focused Review

Modeling Flank Wear of Carbide Tool Insert in Metal Cutting

Study on ploughing phenomena in tool flank face workpiece interface including tool wear effect during ball end milling

Wear Behavior of Tool Flank in the Side Milling of Ti6Al4V: an Analytical Model and Experimental Validation

Effect of Cutting Parameters on Wear Behavior of Coated Tool and Surface Roughness in High-Speed Turning of 300M

Influence of Edge Preparation on Cutting Tool Wear

Experimental Investigation on Influence of Engagement Angle and Tool Geometry on Plunge Milling

Influence of Cutting Tool Edge Preparation on Cutting Force and Surface Integrity

Experimental Study on Wear Characteristics of PCBN Tool with Variable Chamfered Edge

Simulation and experimental study of tool wear in high-speed dry gear hobbing

Tool Wear, Surface Topography, and Multi-Objective Optimization of Cutting Parameters During Machining AISI 304 Austenitic Stainless Steel Flange

Experimental and 3D-Deform Finite Element Analysis on Tool Wear during Turning of Al-Si-Mg Alloy

Tool Wear in Ultra-Precision Diamond Cutting of Non-Ferrous Metals with a Round-Nose Tool

Comparison of Tool Wear, Surface Roughness, Cutting Forces, Tool Tip Temperature, and Chip Shape during Sustainable Turning of Bearing Steel

Study on tool wear for efficient grooving blisk with disc milling cutter

A Comprehensive Study on Cutting Mechanisms and Surface Integrity of AISI 304 when Turning a Curved Surface