Abstract:The size and the character (low and large angle, special boundaries, tilt and twist boundaries, twins) of the grain boundaries (GBs) in polycrystalline materials influence their strength and their fracture toughness. Recent studies devoted to nanocrystalline (NC) materials have shown a deviation from the Hall-Petch law. Special GBs formed by Σ3 twins in face-centred cubic metals are also known to have a strong effect on the mechanical behaviour of these metals, in particular their work-hardening rate. Grain orientation influences also crack path, the fracture toughness of body-centred cubic (BCC) metals and the fatigue crack growth rate of microstructurally short cracks. This paper deals both with slip transfer at GBs and with the interactions between propagating cracks with GBs. In the analysis of slip transfer, the emphasis is placed on twin boundaries (TBs) for which the dislocation reactions during slip transfer are analysed theoretically, experimentally and using the results of atomic molecular simulations published in the literature. It is shown that in a number of situations this transfer leads to a normal motion of the TB owing to the displacement of partial dislocations along the TB. This motion can generate a de-twinning effect observed in particular in NC metals. Crack propagation across GBs is also considered. It is shown that cleavage crack path behaviour in BCC metals is largely dependent on the twist component of the GBs. A mechanism for the propagation of these twisted cracks involving a segmentation of the crack front and the existence of intergranular parts is discussed and verified for a pressure vessel steel. A similar segmentation seems to occur for short fatigue cracks although, quite surprisingly, this crossing mechanism for fatigue cracks does not seem to have been examined in very much detail in the literature. Metallurgical methods used to improve the strength of the materials, via grain boundaries, are briefly discussed.

Slip transfer accelerates slip band cracking of high cycle fatigue in high-Mn austenitic steel at 77 K

Distinct Fatigue Cracking Modes of Grain Boundaries with Coplanar Slip Systems

Selection of Crack Initiation Locations of High Cycle Fatigue in High-Mn Austenitic Steel at 77K

In-situ study of adjacent grains slip transfer of Inconel 718 during tensile process at high temperature

In-situ Analysis of Slip Transfer and Heterogeneous Deformation in Tension of Mg-5.4Gd-1.8Y-1.5Zn Alloy

Effect of Microstructure on Slip-Induced Crack Initiation and Early Propagation of Martensitic Steel During High Cycle Fatigue

Shear Fatigue Cracking of Twin Boundary and Grain Boundary Without Dislocation Impingement

Low Cycle Fatigue Behavior and Crack Initiation Mechanism of Ni-based Single Crystal Curved Thin-Walled Blade Simulator Specimen with Film Cooling Holes

Crossing grain boundaries in metals by slip bands, cleavage and fatigue cracks

Molecular Dynamics Simulation of Persistent Slip Bands Formation in Nickel-Base Superalloys

Microstructure-based Intergranular Fatigue Crack Nucleation Model: Dislocation Transmission Versus Grain Boundary Cracking

Grain boundary engineering of AL6XN super-austenitic stainless steel: Distinctive effects of planar-slip dislocations and deformation twins

Quasi-in-situ observations of crack propagation and microstructure evolution of high manganese austenitic steel at −196 °C

Slip Band Formation in Plastic Deformation Zone at Crack Tip in Fatigue Stage II of 2xxx Aluminum Alloys

In-situ Analysis of the Slip Activity During Tensile Deformation of Cast and Extruded Mg-10Gd-3Y-0.5Zr (wt.%) at 250°C

Molecular dynamics simulation-based representation of intergranular fracture processes in austenitic steel

Synergetic Strengthening from Dynamic Slip Band-Grain Boundary Interaction in a Low-Density FeMnAlC Steel

Computational Investigation of Superalloy Persistent Slip Bands Formation

Quantitative Investigation on the Slip/Twinning Activity and Cracking Behavior During Low-Cycle Fatigue of an Extruded Mg-3Y Sheet

Crystal plasticity modeling of grain boundary softening and fatigue in U75V pearlite steel under low strain conditions: A study of cyclic rolling contact fatigue

The role of slip transfer at grain boundaries in the propagation of microstructurally short fatigue cracks in Ni-based superalloys