Abstract:Methanol to aromatics (MTA) following dual cycles concept unavoidably produced considerable amounts of olefinic intermediates and paraffinic by-products. Their formation and further conversion were vital to improving aromatics production. In this study, a two-stage fluid bed packed with fluid Zn/ZSM-5 catalyst in each stage was used to investigate the MTA reaction at 470 degrees C in the first stage and the secondary conversion of MTA primary products at temperatures from 270 degrees C to 550 degrees C in the second stage with time on stream. During the MTA reaction, the decrease of catalyst acidity was beneficial to controlling hydrogen transfer, thus blocking propane formation. During the secondary conversion of MTA products, at temperatures below 390 degrees C, the alkylation and hydrogen transfer reactions dominated and thus olefins were converted into more alkylbenzene as well as the undesired propane and butane. As the temperature increased from 430 degrees C to 550 degrees C, the aromatization of light hydrocarbon and the dealkylation of alkylbenzene were facilitated, producing more benzene and toluene but increasing methane and ethane yields. Meanwhile, the dehydrogenation and cracking of propane and butane were favored by high temperature and strong acidity so that the yields of ethene and propene increased. It was clarified that the characteristics of secondary conversion of MTA products varied and depended on reaction temperature and catalyst acidity. Based on these findings, the concept of regional functionalization of fluidized bed reactor was proposed for intensification of MTA process based on the reconfiguration of the temperature and acidity of catalyst stream during the fluidized bed reaction-regeneration cycle.

Tandem Aromatization of Pentane with Temperature Shifting Three-Stage Fluidized Bed Reactor

Catalytic Fast Pyrolysis of Rice Straw to Aromatic Compounds over Hierarchical HZSM-5 Produced by Alkali Treatment and Metal-Modification

Temperature-dependent Secondary Conversion of Primary Products from Methanol Aromatization in a Two-Stage Fluidized Bed

Study on in-situ catalytic conversion of alcohols to aromatics and its mechanism

High-yield Production of Aromatics from Methanol Using a Temperature-Shifting Multi-Stage Fluidized Bed Reactor Technology

Direct Production of Aviation Fuel Range Hydrocarbons and Aromatics from Oleic Acid Without an Added Hydrogen Donor

Conversion of Methanol with C5–C6 Hydrocarbons into Aromatics in a Two-Stage Fluidized Bed Reactor

Enhanced Production of Aromatics from Propane with a Temperature-Shifting Two-Stage Fluidized Bed Reactor.

A Multi-Stage Fluidized Bed Strategy for the Enhanced Conversion of Methanol into Aromatics

Aromatization Reactions of Three Gasoline Fractions

Conversion of methanol to aromatics in fluidized bed reactor

Direct Transformation of Syngas to Aromatics over Na-Zn-Fe5C2 and Hierarchical HZSM-5 Tandem Catalysts

STUDY ON n-OCTANE AROMATIZATION ON ZSM-5 CATALYST

Controllable alkylation of benzene with mixed olefins for producing C8-C15 aromatics in jet fuel

Liquefied Petroleum Gas Aromatization to High Octane Gasoline over Zsm-5 Zeolite Catalyst at Low Temperature

Pt3Mn/SiO2 + ZSM-5 Bifunctional Catalyst for Ethane Dehydroaromatization

Highly Selective Conversion of Carbon Dioxide to Aromatics over Tandem Catalysts

Synthesis of Aromatics from Syngas over FeMnK/SiO2 and HZSM-5 Tandem Catalysts

Catalytic conversion of C4 fraction for the production of light olefins and aromatics

Direct and stable hydrogenation of CO2 to aromatics over a tandem catalyst Zn0.1Ti0.9Ox/HZSM-5

Highly selective and stable Zn–Fe/ZSM-5 catalyst for aromatization of propane