Abstract:Plastic waste pollution has become a crucial concern in the field of environmental conservation. Catalytic pyrolysis offers an appealing and efficient technology that can convert plastic waste into pyrolysis oil or valuable chemical products. This provides a practical solution to address the challenges associated with waste management. In this research, an innovative approach of in -situ catalytic pyrolysis was employed in a rotary reactor with solid heat carriers, along with a Ni/ZSM-5 catalyst, to simultaneously produce BTX aromatics and hydrogen from polyethylene. Experimental investigations were conducted to evaluate the characteristics of the Ni/ZSM-5 catalyst. This was achieved by adjusting the metallic nickel loadings on the ZSM-5 support. Next, the effect of Ni/ZSM-5 catalysts and the catalyst -to -polyethylene mass ratio on the selectivity of BTX aromatics in the pyrolysis oil and hydrogen was examined. The results revealed that as the metallic nickel loading increased to 10 wt %, the concentration of BTX aromatics in the pyrolysis oil also increased and reached a maximum of 59.2%. Furthermore, the hydrogen gas fraction in the pyrolysis gas was 58.0 vol% when using the 10Ni/ZSM-5 catalyst in the in -situ catalytic pyrolysis process. The Ni/ZSM-5 catalyst demonstrated a significant positive effect in cleaving the H center dot group. By varying the catalyst -to -polyethylene mass ratio from 0.5 to 2, the concentration of monocyclic aromatics in the pyrolysis oil increased from 68.2% to 87.7%. However, the catalyst -to -feed ratio had an insignificant impact on the hydrogen fraction in the pyrolysis gas, with the hydrogen gas fraction ranging from 43.9 vol% to 46.8 vol%. Additionally, this study provided insights into the potential mechanism of in -situ catalytic pyrolysis of polyethylene within the rotary kiln.

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Controlling Diels-Alder reactions in catalytic pyrolysis of sawdust and polypropylene by coupling CO 2 atmosphere and Fe-modified zeolite for enhanced light aromatics production

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

Pressurized Ex-Situ Catalytic Co-Pyrolysis of Polyethylene and Lignin: Efficient BTEX Production and Process Mechanism Analysis

Recent Progress on Bimetallic Catalysts for the Production of Fuels and Chemicals from Biomass and Plastics by Hydrodeoxygenation

Mechanism of synergistic effects and kinetic analysis in bamboo-LDPE waste ex-situ catalytic co-pyrolysis for enhanced aromatic hydrocarbon production via CeZrAl and HZSM-5 dual catalyst

Tandem catalytic pyrolysis of mixed plastic packaging wastes to produce BTEX over dual catalysts

Mechanism of synergistic effects and kinetic analysis in bamboo-LDPE waste <i>ex</i>-<i>situ</i> catalytic co-pyrolysis for enhanced aromatic hydrocarbon production via CeZrAl and HZSM-5 dual catalyst

Co-pyrolysis of Neem Sawdust and High-Density Polyethylene Towards Aromatic-Rich Bio-Oil: Significance of Zeolite Mesopores

Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics

Catalytic co-pyrolysis of poplar tree and polystyrene with HZSM-5 and Fe/HZSM-5 for production of light aromatic hydrocarbons

Improvement of Aromatics Selectivity from Catalytic Pyrolysis of Low-Density Polyethylene with Metal-Modified HZSM-5 in a CO2 Atmosphere

In-situ Catalytic Pyrolysis of Polyethylene to Co-Produce BTX Aromatics and H2 by Ni/ZSM-5 in the Rotary Reactor with Solid Heat Carriers

Enhancement of bioaromatics production from food waste through catalytic pyrolysis over Zn and Mo-loaded HZSM-5 under an environment of decomposed methane

Catalytic conversion of polyethylene into aromatics with Pt/ZSM-5: insights into reaction pathways and rate-controlling step regulation

Enhancing Hydrocarbon Production Via Ex-Situ Catalytic Co-Pyrolysis of Biomass and High-Density Polyethylene: Study of Synergistic Effect and Aromatics Selectivity.

Catalytic Co-Pyrolysis Of Torrefied Poplar Wood And High-Density Polyethylene Over Hierarchical Hzsm-5 For Mono-Aromatics Production

Preparation of monocyclic aromatic hydrocarbons from industrial lignin residue and polyethylene co-pyrolysis by microwave-assisted in fluidized bed based on bimetal-loaded HZSM-5/MCM-41 core-shell catalyst

Synergistic Co-Conversion of Pentane and Methanol to Aromatics over Bifunctional Metal/zsm-5 Zeolite Catalysts

Polyethylene-derived radical mediated hydrogen atom transfer synergizes with conjugated dual size effect of core-shell particles to enhance BTEX formation

Production of light aromatics by co-pyrolysis of lignite and plastics: Effect of metal loaded HZSM-5