Abstract:The recycling and processing of plastic waste to promote resource sustainability has emerged as a global concern. Selectivily upcycling polyolefins into valuable monocyclic aromatic hydrocarbons (MAHs) is a promising strategy to promote a circular economy but limited by low yield and selectivity. In this study, one-step microwave-triggered tandem pyrolysis coupling ZSM-5 catalytic reforming technology was explored, which is efficient for selectively transforming plastic into benzene, toluene, ethylbenzene, and xylene (BTEX) riched oil products. Pyrolysis and catalytic processes were achieved by mixing plastic and ZSM-5 with graphite, respectively, and placing them in the bottom and top layers of the reactor. Results indicate the mass ratio of plastic or ZSM-5 to graphite and microwave irradiation power would influence the selectivity and yield of MAHs. After careful investigation, the optimum reaction conditions are deemed to be 600 W, and the mass ratio of LDPE and ZSM-5 to graphite is 3:1 and 1:1, respectively, and delightful selectivity and yield of MAHs of 82.06% and 28.12 wt% are obtained under the above conditions. More importantly, the BTEX accounted for a significant amount in the MAHs with the selectivity and yield of 70.53% and 24.17 wt%, demonstrating a strong ability to produce high-value BTEX, which is attributed to the ZSM-5 providing a sufficient active site for reforming the pyrolysis vapors and promote the formation of BTEX by cracking, aromatization and Diels-Alder reactions. Additionally, gas products are rich in C 2 H 4 , C 3 H 6 and C 4 H 8 olefin monomers accounting for around 60% of the gas products, which also manifest high value. Besides, the ZSM-5 can be stabilized by exceeding three successive cycles, and this strategy is also suitable for the catalytic upcycling of PP and mixed plastics to produce MAHs selectively. Therefore, this one-step microwave-triggered tandem pyrolysis coupling ZSM-5 catalytic reforming technology provides a potential waste resource utilization method to convert plastic waste into high-value petrochemical products.

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Mechanistic Understanding of Efficient Polyethylene Hydrocracking over Two-Dimensional Platinum-Anchored Tungsten Trioxide.

Highly Selective Upgrading of Polyethylene into Light Aromatics via a Low-Temperature Melting-Catalysis Strategy

One-Pot Upgrading Polyethylene and CO 2 to Aromatics Via Tandem Catalysis

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

CO2 facilitated upcycling of polyolefin plastics to aromatics at low temperature

Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics

Upcycling Polyethylene to High‐Purity Hydrogen under Ambient Conditions via Mechanocatalysis

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

Polyethylene upcycling to aromatics by pulse pressurized catalytic pyrolysis

Conversion of Polyethylene to Low-Molecular-Weight Oil Products at Moderate Temperatures Using Nickel/Zeolite Nanocatalysts

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Selective Upcycling of Polyethylene over Ru/H‐ZSM‐5 Bifunctional Catalyst into High‐Quality Liquid Fuel at Mild Conditions

Tandem pyrolysis catalytic reforming of plastic waste to high-yield monocyclic aromatics by one-step microwave catalysis

Coupled conversion of polyethylene and carbon dioxide catalyzed by a zeolite–metal oxide system

One‐pot Hydrogenolysis of Polyethylene Terephthalate (PET) to p‐xylene over CuZn/Al2O3 Catalyst

Catalytic Pyrolysis of Waste Polyethylene Using Combined CaO and Ga/ZSM-5 Catalysts for High Value-Added Aromatics Production

Ni-catalyzed carbon-carbon bonds cleavage of mixed polyolefin plastics waste

Conversion of polyethylene waste to short chain hydrocarbons under mild temperature and hydrogen pressure with metal-free and metal-loaded MFI zeolites

Upgrading waste plastics to value-added aromatics

Catalytic conversion of mixed polyolefins under mild atmospheric pressure