Abstract:The recycling and processing of plastic waste to promote resource sustainability has emerged as a global concern. Selectivily upcycling polyolefins into valuable monocyclic aromatic hydrocarbons (MAHs) is a promising strategy to promote a circular economy but limited by low yield and selectivity. In this study, one-step microwave-triggered tandem pyrolysis coupling ZSM-5 catalytic reforming technology was explored, which is efficient for selectively transforming plastic into benzene, toluene, ethylbenzene, and xylene (BTEX) riched oil products. Pyrolysis and catalytic processes were achieved by mixing plastic and ZSM-5 with graphite, respectively, and placing them in the bottom and top layers of the reactor. Results indicate the mass ratio of plastic or ZSM-5 to graphite and microwave irradiation power would influence the selectivity and yield of MAHs. After careful investigation, the optimum reaction conditions are deemed to be 600 W, and the mass ratio of LDPE and ZSM-5 to graphite is 3:1 and 1:1, respectively, and delightful selectivity and yield of MAHs of 82.06% and 28.12 wt% are obtained under the above conditions. More importantly, the BTEX accounted for a significant amount in the MAHs with the selectivity and yield of 70.53% and 24.17 wt%, demonstrating a strong ability to produce high-value BTEX, which is attributed to the ZSM-5 providing a sufficient active site for reforming the pyrolysis vapors and promote the formation of BTEX by cracking, aromatization and Diels-Alder reactions. Additionally, gas products are rich in C 2 H 4 , C 3 H 6 and C 4 H 8 olefin monomers accounting for around 60% of the gas products, which also manifest high value. Besides, the ZSM-5 can be stabilized by exceeding three successive cycles, and this strategy is also suitable for the catalytic upcycling of PP and mixed plastics to produce MAHs selectively. Therefore, this one-step microwave-triggered tandem pyrolysis coupling ZSM-5 catalytic reforming technology provides a potential waste resource utilization method to convert plastic waste into high-value petrochemical products.

Polyethylene upcycling to aromatics by pulse pressurized catalytic pyrolysis

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Catalytic Pyrolysis of Waste Polyethylene Using Combined CaO and Ga/ZSM-5 Catalysts for High Value-Added Aromatics Production

Recycling benzene and ethylbenzene from in-situ catalytic fast pyrolysis of plastic wastes

One-Pot Upgrading Polyethylene and CO 2 to Aromatics Via Tandem Catalysis

Dielectric Barrier Discharge Plasma Synergistic Catalytic Pyrolysis of Waste Polyethylene into Aromatics-Enriched Oil

Self-assembly kieselguhr-based ZSM-5 for catalytic pyrolysis of mask waste to produce high value-added aromatics

Catalytic Pyrolysis of Waste Polyethylene into Aromatics by H3PO4-Activated Carbon

CO2 facilitated upcycling of polyolefin plastics to aromatics at low temperature

Catalytic pyrolysis of waste polyethylene into benzene, toluene, ethylbenzene and xylene (BTEX)-enriched oil with dielectric barrier discharge reactor

Tandem pyrolysis catalytic reforming of plastic waste to high-yield monocyclic aromatics by one-step microwave catalysis

Highly Selective Upgrading of Polyethylene into Light Aromatics via a Low-Temperature Melting-Catalysis Strategy

Catalytic reforming of polyethylene pyrolysis vapors to naphtha range hydrocarbons with low aromatic content over a high silica ZSM-5 zeolite

Catalytic conversion of polyethylene into aromatics with Pt/ZSM-5: insights into reaction pathways and rate-controlling step regulation

Production of monocyclic aromatics and light olefins through ex-situ catalytic pyrolysis of low-density polyethylene over Ga/P/ZSM-5 catalyst

Catalytic Pyrolysis of Waste Plastics over Industrial Organic Solid-Waste-Derived Activated Carbon: Impacts of Activation Agents

Exploring Synergistic Interactions between Polystyrene and Polyethylene

Coking-Resistant Polyethylene Upcycling Modulated by Zeolite Micropore Diffusion.

Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste