Abstract:The recycling and processing of plastic waste to promote resource sustainability has emerged as a global concern. Selectivily upcycling polyolefins into valuable monocyclic aromatic hydrocarbons (MAHs) is a promising strategy to promote a circular economy but limited by low yield and selectivity. In this study, one-step microwave-triggered tandem pyrolysis coupling ZSM-5 catalytic reforming technology was explored, which is efficient for selectively transforming plastic into benzene, toluene, ethylbenzene, and xylene (BTEX) riched oil products. Pyrolysis and catalytic processes were achieved by mixing plastic and ZSM-5 with graphite, respectively, and placing them in the bottom and top layers of the reactor. Results indicate the mass ratio of plastic or ZSM-5 to graphite and microwave irradiation power would influence the selectivity and yield of MAHs. After careful investigation, the optimum reaction conditions are deemed to be 600 W, and the mass ratio of LDPE and ZSM-5 to graphite is 3:1 and 1:1, respectively, and delightful selectivity and yield of MAHs of 82.06% and 28.12 wt% are obtained under the above conditions. More importantly, the BTEX accounted for a significant amount in the MAHs with the selectivity and yield of 70.53% and 24.17 wt%, demonstrating a strong ability to produce high-value BTEX, which is attributed to the ZSM-5 providing a sufficient active site for reforming the pyrolysis vapors and promote the formation of BTEX by cracking, aromatization and Diels-Alder reactions. Additionally, gas products are rich in C 2 H 4 , C 3 H 6 and C 4 H 8 olefin monomers accounting for around 60% of the gas products, which also manifest high value. Besides, the ZSM-5 can be stabilized by exceeding three successive cycles, and this strategy is also suitable for the catalytic upcycling of PP and mixed plastics to produce MAHs selectively. Therefore, this one-step microwave-triggered tandem pyrolysis coupling ZSM-5 catalytic reforming technology provides a potential waste resource utilization method to convert plastic waste into high-value petrochemical products.

Catalytic pyrolysis of waste polyethylene into benzene, toluene, ethylbenzene and xylene (BTEX)-enriched oil with dielectric barrier discharge reactor

Ga-modified Zeolites to Convert Mixed Waste Plastics to Benzene, Toluene, Ethylbenzene, and Xylene (Btex)-Enriched Oil Through a Dielectric Barrier Discharge Plasma-Modified Reactor

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste

Dielectric Barrier Discharge Plasma Synergistic Catalytic Pyrolysis of Waste Polyethylene into Aromatics-Enriched Oil

Catalytic Pyrolysis of Waste Polyethylene Using Combined CaO and Ga/ZSM-5 Catalysts for High Value-Added Aromatics Production

Self-assembly kieselguhr-based ZSM-5 for catalytic pyrolysis of mask waste to produce high value-added aromatics

Production of monocyclic aromatics and light olefins through ex-situ catalytic pyrolysis of low-density polyethylene over Ga/P/ZSM-5 catalyst

Hydrogen and aromatics recovery through plasma-catalytic pyrolysis of waste polypropylene

Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics

Polyethylene upcycling to aromatics by pulse pressurized catalytic pyrolysis

Tandem pyrolysis catalytic reforming of plastic waste to high-yield monocyclic aromatics by one-step microwave catalysis

Improvement of Aromatics Selectivity from Catalytic Pyrolysis of Low-Density Polyethylene with Metal-Modified HZSM-5 in a CO2 Atmosphere

Catalytic Pyrolysis of Plastic Waste: Moving Toward Pyrolysis Based Biorefineries

Catalytic Pyrolysis of Polyethylene and Polypropylene Over Y Zeolite

Tandem catalytic pyrolysis of mixed plastic packaging wastes to produce BTEX over dual catalysts

Recycling benzene and ethylbenzene from in-situ catalytic fast pyrolysis of plastic wastes

Efficient Pyrolysis of Low-Density Polyethylene for Regulatable Oil and Gas Products by ZSM-5, HY and MCM-41 Catalysts

A review on catalytic pyrolysis of plastic wastes to high-value products

Catalytic Pyrolysis of Waste Plastics over Industrial Organic Solid-Waste-Derived Activated Carbon: Impacts of Activation Agents

Enhanced oil dehalogenation during catalytic pyrolysis of WEEE-derived plastics over Fe- and Ca-modified zeolites