Coupled conversion of polyethylene and carbon dioxide catalyzed by a zeolite–metal oxide system

Yangyang Liu,Bing Ma,Jingqing Tian,Chen Zhao

DOI: https://doi.org/10.1126/sciadv.adn0252

IF: 13.6

2024-04-13

Science Advances

Abstract:Zeolite-catalyzed polyethylene (PE) aromatization achieves reduction of the aromatic yield via hydrogenation and hydrogenolysis reactions. The hydrogen required for CO 2 hydrogenation can be provided by H radicals formed during aromatization. In this study, we efficiently convert PE and CO 2 into aromatics and CO using a zeolite–metal oxide catalyst (HZSM-5 + CuZnZrO x ) at 380°C and under hydrogen- and solvent-free reaction conditions. Hydrogen, derived from the aromatization of PE over HZSM-5, diffuses through the Brønsted acidic sites of the zeolite to the adjacent CuZnZrO x , where it is captured in situ by CO 2 to produce bicarbonate and further hydrogenated to CO. This favors aromatization while inhibiting hydrogenation and secondary hydrogenolysis reactions. An aromatic yield of 62.5 wt % is achieved, of which 60% consisted of benzene, toluene, and xylene (BTX). The conversion of CO 2 reaches values as high as 0.55 mmol g PE −1 . This aromatization–hydrogen capture pathway provides a feasible scheme for the comprehensive utilization of waste plastics and CO 2 .

multidisciplinary sciences

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to efficiently convert polyethylene (PE) and carbon dioxide (CO₂) into aromatic hydrocarbons and carbon monoxide (CO), thereby achieving high - value - added utilization of waste plastics and greenhouse gases. Specifically, the research aims to develop a new type of molecular sieve - metal oxide catalyst system (HZSM - 5 + CuZnZrOₓ) that can achieve this conversion under mild conditions (380 °C, without hydrogen and solvent).

### Main problems and challenges
1. **Waste plastic treatment**: Traditional waste plastic treatment methods such as incineration and physical - mechanical recycling have a large carbon footprint and environmental problems.
2. **Chemical upgrading and recycling**: Chemically converting waste plastics into liquid fuels and high - value chemicals is attractive, but the C - C bond dissociation energy in polyethylene (PE) is relatively high (about 372 kJ/mol), making it difficult to selectively carry out chemical conversion.
3. **CO₂ utilization**: As a carbon resource, CO₂ requires a large amount of hydrogen for effective conversion, and traditional methods usually require high - pressure conditions and a large amount of H₂ as a co - reactant.

### Solutions
The researchers proposed an intensified process to achieve the synergistic conversion of PE and CO₂ by coupling aromatization and hydrogen capture using a low - cost molecular sieve - metal oxide catalyst (HZSM - 5 + CuZnZrOₓ). The specific mechanism is as follows:

1. **Aromatization reaction**: The acidic sites on the HZSM - 5 molecular sieve catalyze the C - C bond cleavage and aromatization reaction of PE to generate aromatic hydrocarbons.
2. **Hydrogen capture**: The hydrogen species (H radicals) generated during the aromatization process diffuse through the Brønsted acidic sites of the molecular sieve to the adjacent CuZnZrOₓ metal oxide, are captured by CO₂ and further hydrogenated to CO.
3. **Suppression of side reactions**: Through the above - mentioned hydrogen capture path, the secondary hydrogenation and cracking reactions of aromatic precursor olefins are suppressed, and the selectivity and yield of aromatic hydrocarbons are improved.

### Experimental results
- **Aromatic hydrocarbon yield**: Under the conditions of 380 °C, without hydrogen and solvent, using the HZSM - 5 + CuZnZrOₓ catalyst, an aromatic hydrocarbon yield of 62.5 wt% was achieved, of which 60% were benzene, toluene and xylene (BTX).
- **CO₂ conversion rate**: The CO₂ conversion rate reached 0.55 mmol g PE⁻¹.
- **Catalyst stability**: The catalyst exhibited good cycle stability and regeneration performance.

### Conclusion
This research provides a feasible scheme to realize the comprehensive utilization of waste plastics and CO₂ by coupling the aromatization and hydrogen capture paths, providing new ideas for the global carbon neutrality goal.