Abstract:Recently, carbon nanotube field-effect transistors (CNTFETs) have garnered significant attention from VLSI engineers due to their exceptional electrical properties. This paper proposes a novel high-speed, low-power eight-transistor (8 T) static random-access memory (SRAM) cell based on 32-nm CNTFET technology. The SRAM cell was simulated using the HSPICE tool with a V DD of 0.9 V. The high-speed and low-power characteristics of the SRAM design are attributed to the high subthreshold slope and high carrier mobility of metal-oxide-semiconductor field-effect transistor (MOSFET)-like CNTFETs utilized in the simulations. The implementation of dual threshold transistors, coupled with a transmission gate for bitline access, contributes to the enhanced performance. Key performance metrics such as noise margins, power consumption, delay, and SRAM electrical quality metric (SEQM) of the proposed SRAM have been evaluated and compared with existing CNTFET-based SRAM designs. The proposed cell demonstrates reductions of 73.73%, 43.18%, and 58.70% in read power, write power, and hold power, respectively, compared to the lowest respective power values of other examined SRAM designs. The proposed SRAM ranks second, third, and second in write static noise margin (WSNM), hold static noise margin (HSNM), and read static noise margin (RSNM), respectively, among other designs. Additionally, the proposed SRAM exhibits the least sensitivity to parametric variations compared to other designs. The SEQM, which provides a comprehensive assessment of access times, noise margins, and power usage for the SRAM cell, has been calculated. The SEQM of the proposed SRAM is 10.6, 1.89, 13.15, and 1.82 times higher than that of C6T, BLP8T, Mani's 10 T, and LP8T, respectively.

A 7T1R Nonvolatile SRAM with High Stability, Low Delay and Low Power Consumption Embedded with Transmission Gates (Tgs)

8T1R: A Novel Low-power High-speed RRAM-based Non-volatile SRAM Design.

An 8t/cell FeFET-Based Nonvolatile SRAM with Improved Density and Sub-fJ Backup and Restore Energy

A CNTFET Based Stable, Single-Ended 7T SRAM cell With Improved Write Operation

Highly Compact 1T-1R Architecture (4f(2) Footprint) Involving Fully Cmos Compatible Vertical Gaa Nano-Pillar Transistors and Oxide-Based Rram Cells Exhibiting Excellent Nvm Properties and Ultra-Low Power Operation

A FinFET based low-power write enhanced SRAM cell with improved stability

A Novel Hybrid Nonvolatile SRAM for Suppressing Leakage Power Using Tunnel FET

Highly Area-Efficient Low-Power SRAM Cell with 2 Transistors and 2 Resistors

Spintronic Device Based Non-volatile Low Standby Power SRAM

Novel 15T SRAM Cell for Low Voltage High Reliability Application

A Low-Power Variation-Tolerant 7T SRAM With Enhanced Read Sensing Margin for Voltage Scaling

Design analysis of a low-power, high-speed 8 T SRAM cell using dual-threshold CNTFETs

Robust 6T Si tunneling transistor SRAM design

Simulation of the RRAM based Nonvolatile SRAM cell

Highly compact 1T-1R architecture (4F2footprint) involving fully CMOS compatible vertical GAA nano-pillar transistors and oxide-based RRAM cells exhibiting …

High-Density and High-Reliability Nonvolatile Field-Programmable Gate Array with Stacked 1D2R RRAM Array

Low Store Power, High Speed, High Density, Nonvolatile SRAM Design with Spin Hall Effect-Driven Magnetic Tunnel Junctions

Nanowire Volatile RAM as an Alternative to SRAM

A Highly Reliable and Low-Power Cross-Coupled 18T SRAM Cell

A 28nm 1.5mb Embedded 1T2R RRAM with 14.8 Mb/mm2 Using Sneaking Current Suppression and Compensation Techniques

A 32-Kb High-Speed 8t Sram With Fine-Grained Bitline Stacking For Leakage Reduction In 7nm Technology