Abstract:A novel Wheatstone bridge adjustment circuit with both rough-tuning and fine-tuning functions is designed for balancing the Wheatstone bridge in this article. Firstly, the parametric circuit structure is constructed to facilitate the design of rough-tuning and fine-tuning sub-circuit parameters; Secondly, the quantitative index of Wheatstone bridge imbalance is defined, and the parameter design flow of the rough-tuning sub-circuit, which consists of two sets of series-parallel-resistor (SPR) structures that are, respectively, connected in parallel with the two branches of one half-bridge, is given to directly weaken the initial bridge imbalance in the manufacturing stage. Theoretical analysis results show that the SPR structure can effectively approach any expected value and reduce the number of fixed resistor types. Thirdly, parameters of the fine-tuning sub-circuit, which consists of a resistor and a digital-to-analog converter (DAC), are optimized based on any expected adjustable range. Adjusting the DAC input to seek the middle value of an analog-to-digital converter (ADC) output, indirectly eliminates the additional bridge imbalance caused by mechanical assembly stress, gravity, ambient temperature, etc., in the application stage. Then the influence of the fine-tuning parameters on linear fitting coefficients of the output versus input of the Wheatstone bridge is analyzed theoretically. The results show that the DAC output voltage only has a significant linear impact on the intercept coefficient, while its impact on the scale coefficient is negligible. Finally, the effectiveness of the adjustment circuit is verified on a six-axis force/torque sensor that is developed for an Experimental Module Manipulator (EMM) in the Chinese Space Station (CSS).

Full-Bridge Design for Error Reduction of 3-D Printed Mechanical Wind Sensor

Mechanical Wind Sensor Based on Additive Manufacturing Technology

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Direction Error Suppression of Mechanical Wind Sensors by Optimizing the Configuration of Supporting Beams

Drie Trenches And Full-Bridges Design For Sensitivity Improvement Of Mems Silicon Thermal Wind Sensor

Effect of Taper Ratio on 2-D Mechanical Wind Sensors

Field Measurement System Based on a Wireless Sensor Network for the Wind Load on Spatial Structures: Design, Experimental, and Field Validation

Design of wind sensor system based on microcontroller

3D Flexible Wind Sensor with Its Optimization and Environmental Effect

High Accuracy and Miniature 2-D Wind Sensor for Boundary Layer Meteorological Observation

The Fabrication and Integration of a Novel Shear Stress Sensor Array and Its Wind Tunnel Test

Configuration of a Self-Heated Double Wheatstone Bridge for 2-D Wind Sensors

Octagon-Shaped 2-D Micromachined Thermal Wind Sensor for High-Accurate Applications

Accurate Correlation Modeling between Wind Speed and Bridge Girder Displacement Based on a Multi-Rate Fusion Method

Design and Optimization of Resonant Cavity Piezoelectric Cantilever Sensor for Wind Velocity and Direction Measurement

DRIE Trenches and Full-Bridges for Improving Sensitivity of 2-D Micromachined Silicon Thermal Wind Sensor

Analytic Model of Dual-Layer-Structure MEMS Thermal Wind Sensor with Increased Sensitivity

Experimental Study of a Dual-Mode Control MEMS Wind Sensor with High Accuracy

A Novel 2-D Wind Sensor with Thermal Feedback

Design and Optimization of Wheatstone Bridge Adjustment Circuit for Resistive Sensors

Vertically Integrated Double-Bridge Design for CMOS-MEMS Tri-Axial Piezo-Resistive Force Sensor