Abstract:A novel Wheatstone bridge adjustment circuit with both rough-tuning and fine-tuning functions is designed for balancing the Wheatstone bridge in this article. Firstly, the parametric circuit structure is constructed to facilitate the design of rough-tuning and fine-tuning sub-circuit parameters; Secondly, the quantitative index of Wheatstone bridge imbalance is defined, and the parameter design flow of the rough-tuning sub-circuit, which consists of two sets of series-parallel-resistor (SPR) structures that are, respectively, connected in parallel with the two branches of one half-bridge, is given to directly weaken the initial bridge imbalance in the manufacturing stage. Theoretical analysis results show that the SPR structure can effectively approach any expected value and reduce the number of fixed resistor types. Thirdly, parameters of the fine-tuning sub-circuit, which consists of a resistor and a digital-to-analog converter (DAC), are optimized based on any expected adjustable range. Adjusting the DAC input to seek the middle value of an analog-to-digital converter (ADC) output, indirectly eliminates the additional bridge imbalance caused by mechanical assembly stress, gravity, ambient temperature, etc., in the application stage. Then the influence of the fine-tuning parameters on linear fitting coefficients of the output versus input of the Wheatstone bridge is analyzed theoretically. The results show that the DAC output voltage only has a significant linear impact on the intercept coefficient, while its impact on the scale coefficient is negligible. Finally, the effectiveness of the adjustment circuit is verified on a six-axis force/torque sensor that is developed for an Experimental Module Manipulator (EMM) in the Chinese Space Station (CSS).

Design and Optimization of Wheatstone Bridge Adjustment Circuit for Resistive Sensors

Sensor Placement of Long-Term Health Monitoring for Large Bridges Based on the Real-Time Correction of Finite Element Model

Optimal Force-Balance Control of Closed-Loop Sensing Systems with Time Delay

High-Sensitivity and Wide-Range Resistance Measurement Based on Self-Balancing Wheatstone Bridge and Gated Recurrent Neural Network

Enhance the Sensitivity of Strain-Gauge-based Force Sensors Using Moving Morphable Units Method

High Precision Experimental Exploration of Wheatstone Bridge Resistance Measurement

Enhancing Undergraduate Physics Education: A Pedagogical Exploration of the Wheatstone Bridge with Symmetry and Simulation

Design and Tests of a Novel Adjustable-stiffness Force Sensor

Full-Bridge Design for Error Reduction of 3-D Printed Mechanical Wind Sensor

A 20 μ W, 0.05mm2 Duty-Cycled Resistor and Frequency-Locked-Loop-based Wheatstone Bridge Interface for Low Resistance Sensing Systems

Optimal Design of a Six-Dimensional Force Sensor with Three-Beam Structure

Design of Strain Gauge System

Design And Optimization Of A Novel Resonant Gauge Pressure Sensor

Design and Monitoring Application of an Adjustable Intelligent Bearing Based on Pressure Sensing

A Variable Configuration Force Sensor with Adjustable Resolution for Robotic Applications

A Power-Efficient Readout for Wheatstone-Bridge Sensors With COTS Components

Tunable nanowire Wheatstone bridge for improved sensitivity in molecular recognition

Analysis and Optimization of a Compliant Mechanism-Based Digital Force/weight Sensor

High Sensitivity Pressure Sensor Using Tandem Wheatstone Bridge for Low Pressures

A novel bridge-type compliant displacement amplification mechanism under compound loads based on the topology optimisation of flexure hinge and its application in micro-force sensing

Effect of Sensitivity of Wheatstone Electrical Bridge Using Constant-Current Source