Abstract:Magnesium rare-earth (Mg-RE) alloys have great potential in lightweight applications because of the high specific strength. Wire-arc directed energy deposition (WA-DED) exhibits great prospects for the fabrication of large-scale monolithic structural components with high manufacturing flexibility. In this work, a single-pass multilayer Mg‐10Gd‐3Y‐1Zn‐0.5Zr (wt%, GWZ1031K) deposit was prepared via WA-DED. Electron backscatter diffraction (EBSD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) are conducted to systematically explore the microstructural evolution during the WA-DED process and the subsequent heat treatment . The GWZ1031K alloy deposit fabricated by WA-DED exhibits uniform equiaxed grain structure whose average grain size is 22.3 ± 5.6 μm. The (Mg,Zn) 3 (Gd,Y) phase and RE segregation can be observed along the α-Mg grain boundaries (GBs). A number of needle-like γ ́ /γ ́ ́ phases embedded in the α-Mg grain interior (GI). In addition, there is a small number of fine RE-rich cubic phase and (Gd,Y) 2 O 3 particles. The deposit shows significantly enhanced ductility and slightly improved strength after solution treated at 500 °C for 12 h. After the solution treatment, the intergranular (Mg,Zn) 3 (Gd,Y) eutectics dissolve into the matrix and long period stacking ordered (LPSO) phases precipitate from the GBs into the GI, contributing to the enhancement in ductility. Besides, the LPSO phase along with the existing RE-rich cubic phase, (Gd,Y) 2 O 3 and Zr particles at GBs also play a role in hindering grain growth. The high-density nanoscale β ́ phases appear in the GI after aging treated at 200 °C for 24 h, resulting in the remarkable precipitation strengthening. In comparison with the solution-treated GWZ1031K deposit, the aging-treated exhibits a prominently improved ultimate tensile strength of 337 ± 7 MPa in the building direction (BD) and 331 ± 5 MPa in the travelling direction (TD). It is envisaged that the WA-DED manufacturing method will provide a simple and effective route to fabricate large-scale Mg-RE alloy components for various applications.

Thermophysical Properties of a New HPDC Mg–RE-Based Alloy: Comparative Study to Conventional AE44 Alloy

A high performance Mg-Al-Ca alloy processed by high pressure die casting: Microstructure, mechanical properties and thermal conductivity

A high pressure die cast magnesium alloy with superior thermal conductivity and high strength

Development of High Thermal Conductivity, Enhanced Strength and Cost-Effective Die-Cast Mg Alloy Compared with AE44 Alloy

Semi-solid Rheo-Diecast Mg-xGd-3Y-1Zn-0.4Zr (wt.%) Alloys and Their Comparison with Conventional HPDC Alloys

New HPDC Mg-RE Based Alloy with Exceptional Strength and Creep Resistance at Elevated Temperature

A novel die-casting Mg alloy with superior performance: Study of microstructure and mechanical behavior

Effects of Al addition on the microstructure, mechanical properties and thermal conductivity of high pressure die cast Mg–3RE–0.5Zn alloy ultrathin–walled component

Effect of Al on Microstructure and Mechanical Properties of HPDC Mg-6Y-3Zn Alloys

Microstructure and Tensile Properties of HPDC Mg–RE Alloys with Varying Y Additions

Influence of rare earth addition on microstructures and mechanical properties of high-pressure die casting Mg–8Zn–6Al alloy

A Mg-6Y-3Zn-1Al Mg HPDC alloy having high thermal stability: Study of grain growth kinetics

Effect of Different Casting Techniques on the Microstructure and Mechanical Properties of AE44-2 Magnesium Alloy

Development of high mechanical properties and moderate thermal conductivity cast Mg alloy with multiple RE via heat treatment

Microstructure and Impact Behavior of Mg-4Al-5RE-xGd Cast Magnesium Alloys

Microstructure and Mechanical Properties of a Novel Mg–RE–Zn–Y Alloy Fabricated by Rheo-Squeeze Casting

Microstructure and Elevated Temperature Mechanical and Creep Properties of Mg–4Y–3Nd–0.5Zr Alloy in the Product Form of a Large Structural Casting

Microstructural Characteristics of High-Pressure Die Casting with High Strength-Ductility Synergy Properties: A Review

Study on Microstructures and Mechanical Properties of Die Casting Mg-xGd-3Y-0.5Zr Alloys

High-strength Mg‐10Gd‐3Y‐1Zn‐0.5Zr alloy fabricated by wire-arc directed energy deposition: Phase transformation behavior and mechanical properties

The Partial Substitution of Y with Gd on Microstructures and Mechanical Properties of As-Cast and As-Extruded Mg-10Zn-6Y-0.5Zr Alloy