Abstract:Advanced wrought Mg-Al-Ca-Mn alloys were developed, demonstrating an outstanding array of technical advantages due to the remarkably high negative mixing enthalpy of an Al and Ca pair. This was achieved through meticulous optimization of alloy composition, heat treatment procedures, and extrusion parameters. The primary alloy under consideration was designated as Mg-4.5Al-2.5Ca-0.02Mn (at%). While maintaining a low density of 1.76 g/cm 3 , this alloy exhibited an exceptional properties profile, comprising a high thermal conductivity up to 124 Wm −1 K −1 (approximately 79% of pure magnesium), a high tensile yield strength of 397 MPa (surpassing the high-strength aluminum alloy 7075-T6, by 25% in specific tensile yield strength), a notable tensile elongation of 5.5%, and remarkable nonflammability with a high ignition temperature of 1355 K. Finally, its corrosion resistance was twice that of the AZ91D alloy. The microstructure of the developed alloy system comprised α-Mg, eutectic C36 and C14 compounds, and precipitated C15 compound. The enhanced thermal conductivity was attributed primarily to the purification of the α-Mg matrix, facilitated by C15 plate precipitation during the heat treatment process. The superior mechanical properties were associated with the refinement of the α-Mg phase grain structure and the uniform dispersion of fine compounds achieved through extrusion. Based on the findings derived from this experimental study, a novel approach to designing multifunctional magnesium-based alloys has been formulated; that is, high thermal conductivity and high strength are attainable in plastically deformed Mg alloys composed of element pairs with a negatively high mixing enthalpy.

A high performance Mg-Al-Ca alloy processed by high pressure die casting: Microstructure, mechanical properties and thermal conductivity

Advanced wrought Mg-4.5Al-2.5Ca-0.02Mn (at%) alloys with exceptional balance of high thermal conductivity, yield strength, ductility, nonflammability, and corrosion resistance

Design of Mg Zn Si Ca casting magnesium alloy with high thermal conductivity

A high pressure die cast magnesium alloy with superior thermal conductivity and high strength

High Strength-Thermal Conductivity Mg–Ga–Ca–Ce Sheet by Hot-Extrusion and Rolling

Microstructure, Mechanical and Thermal Properties of Mg-0.5Ca-xZr Alloys

Microstructure and Mechanical Properties of Mg-Xy-1.5mm-0.4zr Alloys

Investigations on Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn-Zr-Nd Alloy

Synergistic effects of alloying, homogenization, and hot extrusion on the mechanical properties of as-cast Mg–Al–Ca magnesium alloys

Effects of Al addition on the microstructure, mechanical properties and thermal conductivity of high pressure die cast Mg–3RE–0.5Zn alloy ultrathin–walled component

Enhancing tensile strength of Mg–Al–Ca wrought alloys by increasing Ca concentration

High Strength Extruded Mg–5Zn–2Nd–1.5Y–0.6Zr–0.4Ca Alloy Produced by Electromagnetic Casting

Fabrication of magnesium alloy with high strength and heat-resistance by hot extrusion and ageing

Effect of Alloying with Al, Nd and Ca and Heat Treatment on Microstructures and Mechanical Properties of Vacuum Die-Cast AM50 Alloy

Development of ultrahigh-strength low-alloy Mg-0.7Al-0.3Ca-0.4Mn (wt.%) alloy with excellent ductility via controlling extrusion temperature

Development of mg-ca-Mn-Ce wrought alloy with both high strength and high thermal stability

Effect of Different Casting Techniques on the Microstructure and Mechanical Properties of AE44-2 Magnesium Alloy

Effect of Zn content on microstructure, mechanical properties and thermal conductivity of extruded Mg-Zn-Ca-Mn alloys

Microstructure and mechanical properties synergistically enhanced via heat treatment modification of the as-extruded Mg-1.5Al-0.5Zn-0.2Y-0.2Ca alloy

Improving the stretch formability of a heat-treatable magnesium–aluminum–calcium–manganese alloy by copper addition at the parts-per-million-level

Mechanical Properties and Microstructures of Mg-Al-Zn Alloys with High Aluminum Contents