Abstract:The research study explored the impact of magnesium on the microstructural characteristics and mechanical properties of Al-Mg-Mn alloy in both its as-cast and homogenized states. Various analytical techniques including optical microscopy, x-ray diffraction, scanning electron microscopy, energy-dispersive x-ray spectroscopy, Vickers microhardness testing, and electrical conductivity measurements were employed for the analysis of the Al-Mg-Mn alloy. The findings reveal that the primary phases present in the as-cast alloy consist of α-Al, β ( ), and . As the magnesium content increases, notable alterations are observed in the diffraction angle θ, inter-planar spacing d, lattice constant a, and the solute magnesium concentration in the α-Al matrix. In instances where the Mg content is low, the grain size and distribution in both the as-cast and homogenized alloys appear coarse and uneven. However, as the magnesium content rises, there is a reduction in the primary dendrite length and columnar crystal zone in the as-cast alloy, alongside enhanced development of secondary dendrites and gradual diminishment of the grain size. This reduction in grain size is particularly pronounced in the homogenized alloy. Additionally, the hardness of both the as-cast and homogenized alloys experiences an increase, while the electrical conductivity undergoes a decrease with escalating magnesium content. Notably, in comparison with the as-cast alloy, the hardness and electrical conductivity of the homogenized alloy exhibit enhancements. The outcomes of this study offer valuable insights for the subsequent processing and deformation applications of the Al-Mg-Mn alloy.

Synergistic effects of alloying, homogenization, and hot extrusion on the mechanical properties of as-cast Mg–Al–Ca magnesium alloys

Mechanical Properties and Microstructures of Mg-Al-Zn Alloys with High Aluminum Contents

Synergistic Effects of Mg Alloying and Subsequent Homogenization Treatment to Improve the Microstructure and Properties of Al-Mg-Mn Alloys

Effect of Hot Extrusion on Microstructure, Texture, and Mechanical Properties of Mg-Zn-Mn-0.5Ca Alloy

Microstructural Evolution and Mechanical Properties of Mg-5y-5gd-Xnd-0.5zr Magnesium Alloys at Different States

Hot Extrusion Effect on the Microstructure and Mechanical Properties of a Mg–Y–Nd–Zr Alloy

The Effects of Grain Refinement and Rare Earth Intermetallics on Mechanical Properties of As-Cast and Wrought Magnesium Alloys

Microstructure, Tensile Properties and Work Hardening Behavior of an Extruded Mg–Zn–Ca–Mn Magnesium Alloy

Tailoring strength and ductility of Mg97Y2Zn1 alloy through the architecture of heterogeneous lamellar structure by large-ratio hot extrusion

A high performance Mg-Al-Ca alloy processed by high pressure die casting: Microstructure, mechanical properties and thermal conductivity

Effect of extrusion parameters on microstructure and mechanical properties of Mg-0.12Ca-0.08Ba alloy

Effect of Mg content on the microstructure, texture, and mechanical performance of hypoeutectic extruded Zn-Mg alloys

Mechanical properties of Mg-Ce-Y-Zr-Zn-Ca microalloyed magnesium alloys composed of near-atomic solute

Effect of Pre-homogenization Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance of Hot Extruded AZ61 Magnesium Alloy

Enhancing tensile strength of Mg–Al–Ca wrought alloys by increasing Ca concentration

Influence of Ca Content on Microstructure and Mechanical Properties of Extruded Mg–Al–Ca–Mn Alloys

Effect of Ca addition on microstructure and mechanical properties of Mg–3.8Al–1.1Sn alloys

Effect of Alloying with Al, Nd and Ca and Heat Treatment on Microstructures and Mechanical Properties of Vacuum Die-Cast AM50 Alloy

Enhanced strength-ductility synergy and activation of non-basal slip in as-extruded Mg–Zn–Ca alloy via heterostructure

Influence of Al Addition on the Microstructure and Mechanical Properties of Mg-Zn-Sn-Mn-Ca Alloys

Alloying effect of Mg on microstructure and mechanical properties at 300 °C of Al–5Cu–1Mn–0.5Ni heat-resistant alloy