Abstract:In this work, co-generation of C2+ hydrocarbons and electricity in solid oxide fuel cells (SOFCs) was realized using methane as fuel. The SOFCs were prepared with Li-La0.8Sr0.2Ga0.8Mg0.2O3−δ (LSGM)/Lr0.7Sr0.3FeO3 (LSF) as the composite anode and LSGM and (La0.6Sr0.4)0.95Co0.2Fe0.8O3−δ (LSCF)/Sm0.2Ce0.8O2−δ (SDC) as the electrolyte and cathode, respectively. Among the anode materials, Li-LSGM has higher C2+ product selectivity. It can be seen from the XPS data that the doping of Li introduces a strong alkaline active center Li+O–, changes the lattice and electronic structure, and increases the surface absorption of oxygen species, which is more conducive to the improvement of the selectivity of C2+ products. LSF has strong electron-conducting ability and high catalytic activity for methane. After mixing with Li-LSGM, XPS data show that more oxygen vacancies are generated, which is beneficial to the electrochemical reaction of the anode and effectively reduces carbon deposition. The maximum power density of the composite anode can reach 188.15 mW/cm–2 with H2 as the fuel at 850 °C, and a C2+ product selectivity of 57.48% is achieved with CH4 as the fuel at 800 °C and the current density is 40 mA/cm–2. In addition, the change of C2+ product selectivity with current density and temperature during cell operation was further investigated, providing enlightenment on how to adjust the output ratio of chemicals and electricity.

Highly Efficient Conversion of Oxygen-Bearing Low Concentration Coal-Bed Methane into Power Via Solid Oxide Fuel Cell Integrated with an Activated Catalyst-Modified Anode Microchannel

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Enhanced conversion efficiency and coking resistance of solid oxide fuel cells with vertical-microchannel anode fueled in CO2 assisted low-concentration coal-bed methane

Clean and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Gas by Solid Oxide Fuel Cells with an Additional Reforming Layer

Efficient conversion of low-concentration coal mine methane by solid oxide fuel cell with in-situ formed nanocomposite catalyst

Power generation via solid oxide fuel cell using ex-reformed oxygen-containing low-concentration methane

Efficient Conversion of Methane into Power Via Microchanneled Solid Oxide Fuel Cells

Applying high efficiency internal reforming catalyst for direct low concentration coal mine methane solid oxide fuel cells

A Robust Fuel Cell Operated on Nearly Dry Methane at 500 °C Enabled by Synergistic Thermal Catalysis and Electrocatalysis

Efficient and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Methane by the Electrochemical Catalysis of SOFC Anode: from Pollutant to Clean Energy

Direct Power Generation from Low Concentration Coal‐Bed Gas by a Catalyst‐Modified Solid Oxide Fuel Cell

Power Generation from a Symmetric Flat-Tube Solid Oxide Fuel Cell Using Direct Internal Dry-Reforming of Methane

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

An efficient and durable solid oxide fuel cell integrated with coal gasification system

System Simulation and Parametric Analysis of Low-Concentration Coal Mine Gas Fed SOFC-CHP with Deoxygenation and Enrichment Pretreatment

High-rate Electrochemical Partial Oxidation of Methane in Solid Oxide Fuel Cells

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

Co-Generation of Electricity and Chemicals via Solid Oxide Fuel Cells Using Li-Doped LSGM and LSF Composite Anodes

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation