Abstract:In this work, co-generation of C2+ hydrocarbons and electricity in solid oxide fuel cells (SOFCs) was realized using methane as fuel. The SOFCs were prepared with Li-La0.8Sr0.2Ga0.8Mg0.2O3−δ (LSGM)/Lr0.7Sr0.3FeO3 (LSF) as the composite anode and LSGM and (La0.6Sr0.4)0.95Co0.2Fe0.8O3−δ (LSCF)/Sm0.2Ce0.8O2−δ (SDC) as the electrolyte and cathode, respectively. Among the anode materials, Li-LSGM has higher C2+ product selectivity. It can be seen from the XPS data that the doping of Li introduces a strong alkaline active center Li+O–, changes the lattice and electronic structure, and increases the surface absorption of oxygen species, which is more conducive to the improvement of the selectivity of C2+ products. LSF has strong electron-conducting ability and high catalytic activity for methane. After mixing with Li-LSGM, XPS data show that more oxygen vacancies are generated, which is beneficial to the electrochemical reaction of the anode and effectively reduces carbon deposition. The maximum power density of the composite anode can reach 188.15 mW/cm–2 with H2 as the fuel at 850 °C, and a C2+ product selectivity of 57.48% is achieved with CH4 as the fuel at 800 °C and the current density is 40 mA/cm–2. In addition, the change of C2+ product selectivity with current density and temperature during cell operation was further investigated, providing enlightenment on how to adjust the output ratio of chemicals and electricity.

Power generation via solid oxide fuel cell using ex-reformed oxygen-containing low-concentration methane

Clean and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Gas by Solid Oxide Fuel Cells with an Additional Reforming Layer

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Applying high efficiency internal reforming catalyst for direct low concentration coal mine methane solid oxide fuel cells

Efficient conversion of low-concentration coal mine methane by solid oxide fuel cell with in-situ formed nanocomposite catalyst

LaMnO3-Type Perovskite Nanofibers as Effective Catalysts for On-Cell CH4 Reforming via Solid Oxide Fuel Cells

Direct Power Generation from Low Concentration Coal‐Bed Gas by a Catalyst‐Modified Solid Oxide Fuel Cell

Enhanced conversion efficiency and coking resistance of solid oxide fuel cells with vertical-microchannel anode fueled in CO2 assisted low-concentration coal-bed methane

Utilization of low-concentration coal-bed gas to generate power using a core-shell catalyst-modified solid oxide fuel cell

Direct carbon dioxide-methane solid oxide fuel cells integrated for high-efficiency power generation with La0.75Sr0.25Cr0.5Fe0.4Ni0.1O3–δ-based dry reforming catalyst

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

Power Generation from a Symmetric Flat-Tube Solid Oxide Fuel Cell Using Direct Internal Dry-Reforming of Methane

Direct carbon dioxide-methane solid oxide fuel cells combined with in-situ exsolution perovskite La0.75Sr0.25Cr0.5Fe0.4Cu0.1O3-δ-based dry reforming catalysts

Efficient and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Methane by the Electrochemical Catalysis of SOFC Anode: from Pollutant to Clean Energy

Power and carbon monoxide co-production by a proton-conducting solid oxide fuel cell with La<sub>0.6</sub>Sr<sub>0.2</sub>Cr<sub>0.85</sub>Ni<sub>0.15</sub>O<sub>3−δ</sub> for on-cell dry reforming of CH<sub>4</sub> by CO<sub>2</sub>

Co-Generation of Electricity and Syngas on Proton-Conducting Solid Oxide Fuel Cell with A Perovskite Layer As A Precursor of A Highly Efficient Reforming Catalyst

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

Co-Generation of Electricity and Chemicals via Solid Oxide Fuel Cells Using Li-Doped LSGM and LSF Composite Anodes

Solid Oxide Fuel Cells Using Gas Hydrates for Power and Syngas Cogeneration: A Thermodynamic and Experimental Assessment

Power and Carbon Monoxide Co-Production by a Proton-Conducting Solid Oxide Fuel Cell with La0.6Sr0.2Cr0.85Ni0.15O3−δ for On-Cell Dry Reforming of CH4 by CO2

Enhanced electrochemical performance and durability for direct CH4–CO2 solid oxide fuel cells with an on-cell reforming layer