Abstract:Solid oxide fuel cells (SOFCs) are considered the most efficient technology for the direct conversion of hydrocarbons to electrical energy. Although the commonly used Ni/YSZ cermet materials in SOFCs show excellent electrocatalytic properties in H 2 fuel, they suffer from carbon deposition problem when hydrocarbon fuels are used. In this work, we study the use of Ni 0 · 05 Ru 0.05 -Mo 2 C with a porous nanorod-shaped morphology as an internal reforming catalyst layer for methane-fueled SOFCs to solve the degradation of cell performance due to carbon deposition. The electrochemical performance and coking tolerance of two types of cells with and without the catalyst layer were systematically studied using methane and hydrogen as fuels. With the catalyst layer, the single cell using methane as fuel exhibits an improvement in peak power density by 24%, increasing from 297 to 367 mW cm −2 and there was no diffusion barrier for fuel gases within the cell. Furthermore, the cell can stably run for 100 h in methane at 700 °C. The improvement of electrochemical performance is attributed to the synergistic effect of Ni and Ru sites anchored on the porous Mo 2 C nanorods catalyst based on strong metal-support interactions, promoting the effective catalytic conversion of CH 4 to CO and H 2 . This study demonstrates that the integration of a catalyst layer for internal reforming is an effective strategy for the direct use of methane in SOFCs.

A Robust Fuel Cell Operated on Nearly Dry Methane at 500 °C Enabled by Synergistic Thermal Catalysis and Electrocatalysis

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

Direct Operation of Solid Oxide Fuel Cells on Low-Concentration Oxygen-Bearing Coal-Bed Methane with High Stability

Direct liquid methanol-fueled solid oxide fuel cell

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Ni and Ru bimetal nanoparticles-anchored porous Mo 2 C nanorods used as an internal reforming catalyst layer for hydrocarbon-fueled solid oxide fuel cells

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Applying high efficiency internal reforming catalyst for direct low concentration coal mine methane solid oxide fuel cells

Development of Methanol-Fueled Low-Temperature Solid Oxide Fuel Cells

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Direct carbon dioxide-methane solid oxide fuel cells integrated for high-efficiency power generation with La0.75Sr0.25Cr0.5Fe0.4Ni0.1O3–δ-based dry reforming catalyst

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Performance Characteristics of a Micro-tubular Solid Oxide Fuel Cell Operated with a Fuel-rich Methane Flame

Efficient conversion of low-concentration coal mine methane by solid oxide fuel cell with in-situ formed nanocomposite catalyst

Enhanced conversion efficiency and coking resistance of solid oxide fuel cells with vertical-microchannel anode fueled in CO2 assisted low-concentration coal-bed methane

Methane-fueled SOFC with Traditional Nickel-Based Anode by Applying Ni/Al2O3 As a Dual-Functional Layer

Catalyst layer supported solid oxide fuel cells running on methane

Proton-Conducting La-Doped Ceria-Based Internal Reforming Layer for Direct Methane Solid Oxide Fuel Cells

Direct-methane Solid Oxide Fuel Cells with an in Situ Formed Ni–Fe Alloy Composite Catalyst Layer over Ni–YSZ Anodes

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation

A Solid Oxide Fuel Cell Runs on Hydrocarbon Fuels with Exceptional Durability and Power Output