Abstract:In this article, a novel fan-out panel-level printed circuit board (PCB)-embedded package for phase-leg silicon carbide (SiC) metal-oxide-semiconductor field-effect transistor (MOSFET) power module is presented. Electro-thermo-mechanical co-design was conducted, and the maximum package parasitic inductance was found to be about 1.24 nH at 100 kHz. Compared with wire-bonded packages, the parasitic inductances of the PCB-embedded package decreased at least by 87.6%. Compared with blind via structure, the thermal resistance of the proposed blind block structure reduced at most by about 26%, and the stress of the SiC MOSFETs decreased by about 45.2%. Then, a novel PCB-embedded packaging process was developed, and three key packaging processes were analyzed. Furthermore, effect of PCB-embedded package on static characterization of SiC MOSFET was analyzed, and it was found that: 1) Output current of PCB-embedded package was decreased under a certain gate-source voltage compared to SiC die; 2) Miller capacitance of SiC MOSFET was increased thanks to parasitic capacitance induced by package; and 3) compared with SiC die, nonflat miller plateau of the PCB-embedded package extends, and as drain-source voltage increases, the nonflat miller plateau extends. Lastly, switching characteristics of the PCB-embedded package and TO-247 package were compared. The results show that the PCB-embedded package has smaller parasitic inductances.

Equivalent Circuit and Parasitic Parameter Extraction of 3D Comb-Like Redistribution Layer Applied for FOWLP

Parasitic Inductance Modeling for On-chip Interconnects Based on IC Analysis on Inductive Effects

Experimental Characterization of On-Chip Inductor and Capacitor Interconnect: Part I. Series Case

A Parameter Design Method for High Performance LCLC-LC Compensated CPT Systems

Improvement in Cavity and Model Designs of LDMOS Power Amplifier for Suppressing Metallic Shielding Cover Effects

Equivalent Inductance Analysis and Quantification for PCB PDN Design

PDN Impedance Modeling for Multiple Through Vias Array in Doped Silicon

Design and Simulation to Reduce the Crosstalk of Ultra-Fine Line Width/space in the Redistribution Layer

Efficient DC and AC Impedance Calculation for Arbitrary-Shape and Multilayer PDN Using Boundary Integration

Plane-Pair PEEC Modeling for Package Power Layer Nets with Inductance Extraction

PCB PDN Prelayout Library for Top-Layer Inductance and the Equivalent Model for Decoupling Capacitors

Signal Integrity Analysis of Through-Silicon Via Based 3D Integrated Circuit

Fan-Out Panel-Level PCB-Embedded SiC Power MOSFETs Packaging

Efficient Modeling of Rerouted Return Currents in Multilayered Power-Ground Planes by Using Integral Equation

Field-Based Parasitic Capacitance Models for 2d and 3d Sub-45-Nm Interconnect

Study on Extraction of Capacitance Parameters of Three Dimensional Interconnect Structures Based on Finite Element Method

An LC Resonant Method for the Accurate Extraction of Small Parasitic Resistance

Method for system-level signal and power integrity modeling of high-speed electronic packages

Modeling Multilayer Power/ground Planes in Printed Circuit Boards and Electronic Packages Using Microwave Networks

Analysis and Experimental Validation of Power Distribution Network with Multi-slots Parallel-Plane Structure

Capacitive coupling analysis of TSV array in 3D packaging