Abstract:Engineering practice has demonstrated that seal failure can result in severe leakage and wear, reducing the efficiency of hydraulic systems and even leading to major safety risks. Currently, analyses of the thermal aspect of seal interfaces are relatively limited, with most studies focusing on mechanical analysis. However, in actual applications, temperature has a significant impact on sealing performance. In this paper, nonlinear elastomechanics, viscous fluid mechanics, micro-contact mechanics, micro-deformation theory, and thermodynamics are coupled to establish a mixed lubrication model considering the thermal effect. The reliability of the mixed lubrication model is verified through experiments, and the temperature distribution of the oil film in the sealing area and the temperature distribution of the seal ring are simulated. Finally, the effects of the reciprocating speed, root mean square roughness, fluid medium pressure, and seal pre-compression on seal friction force and leakage are investigated. The results show that the heat generated in the sealing area accumulates at the bottom of the V-ring. Under the same conditions, compared with the instroke, the temperature-rise area of the outstroke is biased to the left and the increase in temperature is greater. In addition, the piston rod speed and the preliminary compression of the seal ring have a greater impact on the overall seal friction force and leakage. Under a lower seal pre-compression, the RMS roughness has a great influence on the leakage and friction in the outstroke, while the impact of the internal stroke is limited.

Transient dynamic analysis and experimental verification on lubrication regime transition during startup period of non-contacting mechanical seal in liquid oxygen turbopump

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Axisymmetric dynamic model and seal behavior analysis of mechanical seals during startup and shutdown operation

THE TRANSITION OF WEAR AND LEAKAGE CHARACTERISTICS OF THE CYLINDER BLOCK/VALVE PLATE INTERFACE IN A WIDE RANGE OF OPERATING CONDITIONS

Multi-Physical Field, Coupled, Mixed Lubrication Analysis of Hydraulic Reciprocating Vacuum Lip Seal

Transient mixed thermal elastohydrodynamic lubrication under startup and shut down conditions

Modelling and theoretical research on transient lubrication and wear coupling behavior of main bearing during start-up of low-speed diesel engine

Fluid-structure interaction analysis on turbulent annular seals of centrifugal pumps during transient process

Theoretical and Experimental Study of Transient Behavior of Spiral-Groove Thrust Bearings During Start-Up

Transient Thermo-Elasto-hydrodynamic Analysis of a Bidirectional Thrust Bearing in Start-Up and Shutdown Processes

CEL algorithm-based visualization simulation of the transient oscillation of engine lubricant

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Experimental Investigations and Field Applications of Oil-Film-Lubricated Mechanical Face Seals with Spiral Grooves

Design and Experimental Study on the Controllable High-Speed Spiral Groove Face Seals

Transient nonlinear dynamics of the rotor system supported by low viscosity lubricated bearing

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

Dynamic Mixed Lubrication Investigation of Water-Lubricated Bearing With Unbalanced Rotor During Start-Up

Effect of two-phase flow lubrication on sealing performance of spiral groove mechanical seal under high speed and low temperature conditions

Thermo-elastohydrodynamic lubrication performance study of step seal under transient condition

Numerical Simulation Model of a Reciprocating Seal Based on the Mixed-Lubrication Theory