Abstract:Surface roughness and thermal action are of remarkable importance in the lubrication performance of mechanical components, especially in extreme conditions. However, available studies mainly focus on the full-film lubrication conditions without considering temperature rise and real 3D surface roughness due to the complexity of surface topography and temperature characteristics. Moreover, studies on the interfacial thermal behaviors of 3D rough surface lubricated contact in an extended range of working conditions remain limited. In this paper, a deterministic mixed thermal elastohydrodynamic lubrication model considering real 3D surface roughness and thermal effects is proposed. In this model, pressure and temperature are coupled with each other, the computation of elastic deformation is accelerated through the discrete convolution and fast Fourier transform method, the temperature field is calculated with the column sweeping technique, and the semi-system method is introduced to improve convergence and numerical stability under severe conditions. The model is validated by comparing its results with available published numerical and experimental results. The thermal behaviors of the contact interface are studied in a wide range of working conditions. The influences of surface roughness and thermal effect on lubrication performance are revealed. The results show that the proposed model can be used as a powerful analysis tool for lubrication performance and temperature prediction in various heavy-load, high-speed lubricated components over a wide range of lubrication conditions.

Transient mixed thermal elastohydrodynamic lubrication under startup and shut down conditions

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

A Thermal Equilibrium Analysis of Line Contact Hydrodynamic Lubrication Considering the Influences of Reynolds Number, Load and Temperature

Thermal mixed elastohydrodynamic lubrication modeling and analysis of the lubricated non-conformal contacts with non-Gaussian surface roughness and coating

Modelling and theoretical research on transient lubrication and wear coupling behavior of main bearing during start-up of low-speed diesel engine

Transient dynamic analysis and experimental verification on lubrication regime transition during startup period of non-contacting mechanical seal in liquid oxygen turbopump

Theoretical and Experimental Study of Transient Behavior of Spiral-Groove Thrust Bearings During Start-Up

Transient-mixed lubrication model numerically for friction and wear of journal bearings under heavy load during start-up

Effects of Texture Orientation on the Mixed Thermal Elastohydrodynamic Lubrication and Fatigue Life in Point Contacts

A Computer Thermal Model of Mixed Lubrication in Point Contacts

Transient Thermo-Elasto-hydrodynamic Analysis of a Bidirectional Thrust Bearing in Start-Up and Shutdown Processes

Dynamic Mixed Lubrication Investigation of Water-Lubricated Bearing With Unbalanced Rotor During Start-Up

Thermal-structure interactions on the nonlinear behavior of the heavy-load mechanical press with multiple clearance-induced joints

Transient lubrication analysis of journal-thrust coupled bearing considering time-varying loads and thermal-pressure coupled effect

Investigation on the nonlinear dynamic behaviors of water-lubricated bearings considering mixed thermoelastohydrodynamic performances

Transient Tribodynamic Analysis of Crankshaft-Main Bearing System During Engines Starting Up

Thermal Analysis of Lubricated Three-Dimensional Contact Bodies Considering Interface Roughness

Performance of Surface Texturing During Start-Up under Starved and Mixed Lubrication

Transient Analysis of the Textured Journal Bearing Operating with the Piezoviscous and Shear-Thinning Fluids

Experimental Study of the Transient Thermal Effect and the Oil Film Thickness of the Equalizing Thrust Bearing in the Process of Start-Stop with Load

Coupling study on dynamics and TEHL behavior of high-speed and heavy-load angular contact ball bearing with spinning