Abstract:Purpose – The purpose of this paper is to analyze the problems of tilting-pad thrust bearing static instability and lubrication performance under static bistability. Design/methodology/approach – The static equilibrium state of tilting-pad thrust bearing is analyzed, and key parameters are extracted from the general lubrication model. Then, a distribution area of bearing static equilibrium points is achieved by solving the model. The area is divided into three sub-areas which represent monostabillity, bistability and instability, and an unstable boundary of the area is discovered. By these findings, a reversible lubrication failure phenomenon is explained. A calculation method is proposed to obtain bearing lubrication performance under the bistability. Findings – The variation of working conditions can lead to migration of unstable boundary and static instability. After resuming the working conditions, unstable boundary will resume in situ, and the bearing will operate steadily again. Moreover, there is a big difference between the two groups of lubrication performance solutions under the bistability. Practical implications – The static stability acceptance test of tilting-pad thrust bearing should be implemented under start–stop, accidental excitation and other conditions before service to prevent such lubrication failure phenomenon. Moreover, fulcrum position of the bearing pad should be kept away from the bistable area. Originality/value – This paper has preliminarily revealed a static instability mechanism of tilting-pad thrust bearing, analyzed bistability lubrication performance and proposed some suggestions to improve the bearing stability.

Transient Thermo-Elasto-hydrodynamic Analysis of a Bidirectional Thrust Bearing in Start-Up and Shutdown Processes

Transient TEHD Analysis of a Thrust Bearing Based on Two-Way Fluid-Solid-Thermal Interaction

Lubrication Performance Analysis of Lead-Bismuth Internal-Feedback Bearings in the Nuclear Main Pump System

Tehd Analysis Of A Bidirectional Thrust Bearing In A Pumped Storage Unit

Thermo-hydrodynamic Lubrication and Energy Dissipation Mechanism of a Pump-Turbine Thrust Bearing in Load-Rejection Process

Analysis on the Thrust Bearing Lubrication in Pumped Storage Unit Based on Fluid-Solid-thermal Interactions

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Influence of squeezing and interface slippage on the performance of water-lubricated tilting-pad thrust bearing during start-up and shutdown

Experimental Study of the Transient Thermal Effect and the Oil Film Thickness of the Equalizing Thrust Bearing in the Process of Start-Stop with Load

Experimental Study of the Start-up Transient Thermal Effects on Tilting-Pad Thrust Bearings

Three-dimensional TEHD Analysis of Bi-directional Thrust Bearing in Pump-turbine

Asymmetry Characteristic of Tilting-Pad Thrust Bearing During the Start-Up and Shut-Down Process

3D Two-Way Coupled Tehd Analysis on the Lubricating Characteristics of Thrust Bearings in Pump-Turbine Units by Combining Cfd and Fea

Transient lubrication analysis of journal-thrust coupled bearing considering time-varying loads and thermal-pressure coupled effect

Transient Thermal Thermal Elastohydrodynamic Lubrication Performance of Multi-tilting-pad Journal Bearing

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Theoretical and Experimental Study of Transient Behavior of Spiral-Groove Thrust Bearings During Start-Up

Analysis of Tilting-Pad Thrust Bearing Static Instability and Lubrication Performance under the Bistability

Transient Lubrication Performance of Tilting-Pad Journal Bearings under Dynamic Load Considering Bi-Directional Misalignment and Mixing Temperature Behavior

Analysis of transient and static lubrication performance of tilting pad thrust bearing considering pivot deformation