Abstract:The thermal elastic hydro dynamic（TEHD） lubrication analysis for the thrust bearing is usually conducted by combining Reynolds equation with finite element analysis（FEA）. But it is still a problem to conduct the computation by combining computational fluid dynamics（CFD） and FEA which can simulate the TEHD more accurately. In this paper, by using both direct and separate coupled solutions together, steady TEHD lubrication considering the viscosity-temperature effect for a bidirectional thrust bearing in a pump-turbine unit is simulated combining a 3D CFD model for the oil film with a 3D FEA model for the pad and mirror plate. Cyclic symmetry condition is used in the oil film flow as more reasonable boundary conditions which avoids the oil temperature assumption at the leading and trailing edge. Deformations of the pad and mirror plate are predicted and discussed as well as the distributions of oil film thickness, pressure, temperature. The predicted temperature shows good agreement with measurements, while the pressure shows a reasonable distribution comparing with previous studies. Further analysis of the three-coupled-field reveals the reason of the high pressure and high temperature generated in the film. Finally, the influence of rotational speed of the mirror plate on the lubrication characteristics is illustrated which shows the thrust load should be balanced against the oil film temperature and pressure in optimized designs. This research proposes a thrust bearing computation method by combining CFD and FEA which can do the TEHD analysis more accurately.

Transient TEHD Analysis of a Thrust Bearing Based on Two-Way Fluid-Solid-Thermal Interaction

Transient Thermo-Elasto-hydrodynamic Analysis of a Bidirectional Thrust Bearing in Start-Up and Shutdown Processes

Three-dimensional TEHD Analysis of Bi-directional Thrust Bearing in Pump-turbine

Thermo-hydrodynamic Lubrication and Energy Dissipation Mechanism of a Pump-Turbine Thrust Bearing in Load-Rejection Process

Analysis on the Thrust Bearing Lubrication in Pumped Storage Unit Based on Fluid-Solid-thermal Interactions

Tehd Analysis Of A Bidirectional Thrust Bearing In A Pumped Storage Unit

3D Two-Way Coupled Tehd Analysis on the Lubricating Characteristics of Thrust Bearings in Pump-Turbine Units by Combining Cfd and Fea

Analysis of Thermoelastic Hydrodynamic Lubrication Performance of Thrust Bearings for Large Hydrogenerators

Theoretical and Experimental Study on the Static and Dynamic Characteristics of Tilting-Pad Thrust Bearing

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Influence of Installation Deviation of Thrust Bearing on Oil Film Flow of 1000 MW Hydraulic Turbine Unit

Thermo-elastohydrodynamic Lubrication Analysis on Multi-tilting-pad Journal Bearing

Transient lubrication analysis of journal-thrust coupled bearing considering time-varying loads and thermal-pressure coupled effect

A Review on the Large Tilting Pad Thrust Bearings in the Hydropower Units

Thermal Growth Simulations Of The Rotor And Auxiliary Bearing Contact Events

Thermoelastohydrodynamic Analysis of the Static Performance of Tilting-Pad Journal Bearings with the Newton–Raphson Method

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

A Numerical Investigation of Mixed Thermal Elastohydrodynamic Lubrication in Tilting-Pad Journal Bearing

Transient Thermal Thermal Elastohydrodynamic Lubrication Performance of Multi-tilting-pad Journal Bearing

Study on the thermoelastohydrodynamic performance of tilting-pad bearings for large-scale power units

Analysis of transient and static lubrication performance of tilting pad thrust bearing considering pivot deformation