Abstract:Purpose For moderate pressure and high pressure gear pumps, the temperature failure problem of bearings is now of considerable concern because of their heavy loads. However, the compact structure and the efficiency consideration make it extremely difficult to improve the bearing cooling. A self-circulating oil bearing system is developed for gear pumps with self-lubricating bearings to solve this problem. The oil is aspirated in from the low pressure chamber of the gear pump and discharged to the same chamber by using the pressure difference in the journal bearing, thus achieving the self-circulation. Design/methodology/approach An experiment test rig has been built for the feasibility study. The oil flow rate under different speeds has been recorded. Furthermore, the temperatures of the bearings with or without the oil circulation have been compared. Additionally, the oil flow in the test rig has been simulated using computational fluid dynamics codes. Findings The experimental and numerical results agree well. The experimental results indicate that the oil flow rate increases approximately linearly with the speed and the bearing temperature can be lowered successfully. The calculation results indicate that the bearing load capacity is nearly the same. Both the experimental and numerical studies establish that the self-circulating oil bearing system works successfully. Originality value As far as the authors know, it is the first time to find that the self-circulation can be built using the pressure difference in the bearing oil film, and this principle can be applied in the cooling and lubrication of the gear pumps to solve the temperature failure problem.

Tehd Analysis Of A Bidirectional Thrust Bearing In A Pumped Storage Unit

Lubrication Performance Analysis of Lead-Bismuth Internal-Feedback Bearings in the Nuclear Main Pump System

Analysis on the Thrust Bearing Lubrication in Pumped Storage Unit Based on Fluid-Solid-thermal Interactions

Transient Thermo-Elasto-hydrodynamic Analysis of a Bidirectional Thrust Bearing in Start-Up and Shutdown Processes

Multi-objective Optimization Design of Sliding Bearing of High-speed Centrifugal Pump Based on Lubrication Characteristics Analysis

Three-dimensional TEHD Analysis of Bi-directional Thrust Bearing in Pump-turbine

Thermo-hydrodynamic Lubrication and Energy Dissipation Mechanism of a Pump-Turbine Thrust Bearing in Load-Rejection Process

3D Two-Way Coupled Tehd Analysis on the Lubricating Characteristics of Thrust Bearings in Pump-Turbine Units by Combining Cfd and Fea

Numerical simulations for the fluid-thermal-structural interaction lubrication in a tilting pad thrust bearing

Transient TEHD Analysis of a Thrust Bearing Based on Two-Way Fluid-Solid-Thermal Interaction

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Theoretical and Experimental Study on the Static and Dynamic Characteristics of Tilting-Pad Thrust Bearing

Effects of support structure on lubricating properties of bi-directional thrust bearings

Performance Analysis for Thermo-Elastic-hydrodynamic Lubrication of Thrust Bearing with Pins and Double Layer System

Experimental and Numerical Analysis of a Self-Circulating Oil Bearing System for Gear Pumps

Analysis of transient and static lubrication performance of tilting pad thrust bearing considering pivot deformation

Thermo-elastohydrodynamic Lubrication Analysis on Multi-tilting-pad Journal Bearing

A Thermohydrodynamic Analysis of the Self-Lubricating Bearings Applied in Gear Pumps Using Computational Fluid Dynamics Method

Analysis of lubrication characteristics of dynamic-static pressure hybrid thrust bearing considering key factors under eccentric loads

Study on the Water Lubricated Large-scale Tilting Pad Thrust Bearing by Finite Element Method

Analysis of the Hydrodynamic Lubrication Characteristics of the External Return Spherical Bearing Pair of an Axial Piston Pump/Motor