Abstract:The occurrence of skidding and overskidding behaviour is likely to scratch rolling element raceways and lead to a significant temperature rise and thermal deformation. The ball-cage interaction and cage whirling motion are likely to oscillate as this skidding is aggravated. To address the damage problems introduced by skidding behaviour, a kinematic-Hertzian contact thermal-elasto-hydrodynamic (KH-TEHD) model with a 5-layer loop structure is proposed. Various factors are considered in the model, including the dynamic beahviour of bearing components, quasi-static analysis on bearing load distribution and deformation of bearing components, and the miscellaneous forces (unbalanced force, collision tangential friction, drag force) acting on the ball and cage. Ball-raceway lubrication, lubricant temperature rise, thermal expansion of shaft and bearing housings, and hydrodynamic pressure acting between the cage surface and guide-ring surface are established in this paper. A 7307AC bearing experimental study under varying operating speeds, axial loads and two lubricating conditions is conducted to validate the accuracy and effectiveness of the KH-TEHD model. The superiority of the developed model is illustrated by comparison with previous models, and the results suggest that the thermal expansion and cage-guide ring hydrodynamic pressure cannot be ignored. After comparisons with literature results, it is found that the overskidding degree is approximately proportional to the square of the bearing size under the same level of operating speed. The maximum thermal deformation at the bearing raceway under starvation lubrication reaches 4 times the ball-raceway clearance. The cage simulation results indicate that the cage whirling oscillation amplitude increases with increasing operating speed and unbalanced mass and generally decreases with increasing axial load. The proposed model and discussion of the results are useful for mitigating the skidding degree under certain conditions and avoiding cage instability and wear.

Simulation of the load reduction process of high-speed angular contact ball bearing with coupling model of dynamics and thermo-elastohydrodynamic lubrication

Simulation Sudden Oil Supply in Starved High-Speed Angular Contact Ball Bearing

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Transient mixed thermal elastohydrodynamic lubrication analysis of aero ball bearing under non-steady state conditions

Thermal-mechanical Fully Coupled Analysis of High-Speed Angular Contact Ball Bearings

Coupling Study on Quasi-Static and Mixed Thermal Elastohydrodynamic Lubrication Behavior of Precision High-Speed Machine Spindle Bearing with Spinning

Radial Load Analysis of Matched Angular Contact Ball Bearings in Bearing-Rotor System

Comparative analysis of angular contact bearing stiffness calculated by Hertz contact and thermo-elastohydrodynamic lubrication

Sliding behavior of high speed ball bearings based on improved nonlinear dynamic model

Skidding and Cage Whirling of Angular Contact Ball Bearings: Kinematic-hertzian Contact-Thermal-elasto-hydrodynamic Model with Thermal Expansion and Experimental Validation

Investigation on the angular contact ball bearings under low speed and heavy load with coupled mixed lubrication and quasi‐dynamic analysis

Simulation Analysis and Experimental Study on the Fluid–Solid–Thermal Coupling of Traction Motor Bearings

Nonlinear dynamic model for skidding behavior of angular contact ball bearings

An Efficient Modeling Method for the Simulation of Ball Bearing Dynamics

Transient Thermal Thermal Elastohydrodynamic Lubrication Performance of Multi-tilting-pad Journal Bearing

Analysis of transient and static lubrication performance of tilting pad thrust bearing considering pivot deformation

Dynamic and thermal coupling modeling analysis of full-ceramic angular contact ball bearing considering sliding

Transient lubrication analysis of journal-thrust coupled bearing considering time-varying loads and thermal-pressure coupled effect

Dynamic Model for Slippage of Angular Contact Ball Bearings Based on Euler Equation

Numerical and experimental investigation on ball motion with oil rheology and thermal effect in high speed ball bearings

Multi-time scale thermal tribological dynamics coupling model of the helicopter intermediate reducer under severe loss of lubrication