Abstract:Rolling bodies in cageless ball bearings without cage control will always hit each other. This causes the rolling bodies to wear out faster and decreases the bearing's performance. But most of the available references only look at how well the bearing works when the cage is in place. They do not look at how the inner ring's dynamic response changes when the cage is removed and the rolling elements' motion changes. On the basis of this, a nonlinear rolling-body dynamics model with six degrees of freedom and contact between rolling bodies is suggested. The dynamics model of an automatic discrete system is built on the motion coupling and functional slot discrete theories. The power hardware re-turn method is used to figure out how to solve the dynamics model. The results show that after the rotor falls into the inner ring, the rolling bodies will cause cumulative collision for a short time. Then, because of the function slot, the occasional collision between the rolling bodies would not cause cumulative collision again, and the inner ring motion will be more stable. When the speed of the rotor's fall goes up, the rolling bodies hit each other more often. This makes the inner ring move more steadily, but there is a limit. To make sure that the theoretical analysis and the results of the theoretical solution are right, a high-speed camera was used. To make sure that the theoretical analysis and the results of the theoretical solution are right, we built a bearing test platform to take pictures of the rolling body of the bearing as it moved. The image processing program is used to figure out the rolling body's angular speed, compare the test results to the theoretical study and make sure that the theoretical study is right. The theoretical study is compared to the test results to see if the theoretical study is right.

Sliding behavior of high speed ball bearings based on improved nonlinear dynamic model

A nonlinear dynamic model to predict skidding behavior of angular contact ball bearings

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Nonlinear dynamic model for skidding behavior of angular contact ball bearings

Dynamic Characteristic Analysis of High-speed Spherical Ball Bearing

Numerical and experimental investigation on ball motion with oil rheology and thermal effect in high speed ball bearings

Dynamic behaviors of angular contact ball bearings based on nonlinear dynamic model with flexible ring and cage motion whirl

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

A Quasi-Dynamic Model for High-Speed Ball Spinning

Skidding Behavior of Cylindrical Roller Bearings under Time-Variable Load Conditions

Dynamic Model for Slippage of Angular Contact Ball Bearings Based on Euler Equation

An Efficient Modeling Method for the Simulation of Ball Bearing Dynamics

A comprehensive study on dynamic performance of ball bearing considering bearing deformations and ball-inner raceway separation

Simulation of the load reduction process of high-speed angular contact ball bearing with coupling model of dynamics and thermo-elastohydrodynamic lubrication

Dynamic, Thermal, and Vibrational Analysis of Ball Bearings with Over-Skidding Behavior

Modeling of a deep-groove ball bearing with waviness defects in planar multibody system

An approach for calculating the dynamic load of deep groove ball bearing joints in planar multibody systems

Dynamic contact and stiffness characteristic analysis of angular contact ball bearings under combined external loads

Nonlinear Dynamic Modeling of Rotor System Supported by Angular Contact Ball Bearings

Dynamic and thermal coupling modeling analysis of full-ceramic angular contact ball bearing considering sliding

Research on multi-body dynamic model of automatic discrete system for protection bearing without cage