Abstract:Responses of the bearing system are usually predicted or tested, to analyze its nonlinear dynamic characteristics. However, responses predicted from the bearing model constructed by Hertz contact theory usually show differences with their tested counterparts, denoting the improper setting of the nonlinear contact parameters. It is compulsory to reduce such differences and obtain a precise bearing model using nonlinear model updating techniques. In this paper, a novel nonlinear model updating framework is proposed following the Multi-Harmonic Balance Method (MHBM) and the analytical sensitivity analysis, for updating of the rotor-bearing system using the nonlinear responses in the frequency domain. With the derivation of bearing response sensitivities to the nonlinear contact parameters, increments of the nonlinear parameters can be ascertained by the sensitivity inverse and updating of the nonlinear bearing model can be implemented in an iterative way, until a precise bearing model with the response differences reduced to minima is obtained. Firstly, a novel MHBM model is derived for the bearing system, which is fully described by matrix operations and used to further deduce the analytical sensitivity formulations of the bearing responses to the design parameters. Afterwards, the bearing responses and sensitivities in the frequency domain are predicted by the continuation strategy. Finally, model updating is conducted for the bearing system using the traditional inverse-sensitivity framework. Two cases are used to demonstrate the feasibility of the method. The first case is to update bearing parameters of contact stiffness, clearance and eccentricity of a 2-DOF bearing system in order to match the predicted bearing responses with the measured ones in strong nonlinearity with the multivalued phenomenon. The next is to update the Hertz contact parameters of the left and right bearings, together with the disc eccentricity, of a Finite Element (FE) rotor-bearing system. These results show the validity and superiority of the proposed method.

Nonlinear Dynamic Modeling of Rotor System Supported by Angular Contact Ball Bearings

A New Nonlinear Dynamic Model of the Rotor-Bearing System Considering Preload and Varying Contact Angle of the Bearing

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Review of Nonlinear Rotor-Bearing Dynamics System

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

Study on the Dynamic Response of an Unbalanced Rotor System Supported by Ball Bearings

Nonlinear Dynamics of Rotor System Supported by Bearing with Waviness

Dynamic modeling and simulation of a flexible-rotor ball bearing system

Nonlinear Modeling and Dynamic Analysis of the Rotor-Bearing System

A Coupled Model of Angular-Contact Ball Bearing–Elastic Rotor System and Its Dynamic Characteristics Under Asymmetric Support

Nonlinear model updating of the rotor-bearing system by multi-harmonic balance method and analytical sensitivity derivation

Dynamic contact and stiffness characteristic analysis of angular contact ball bearings under combined external loads

Nonlinear response of rotor system with bearing dynamic misalignment

Dynamic behaviors of angular contact ball bearings based on nonlinear dynamic model with flexible ring and cage motion whirl

Dynamic characteristics of ball bearing-coupling-rotor system with angular misalignment fault

Nonlinear Dynamic Analysis Of Rotor-Bearing-Pedestal Systems With Multiple Fit Clearances

Study on Nonlinear Dynamic Response of an Unbalanced Rotor Supported on Ball Bearing

Dynamic modeling of moment wheel assemblies with nonlinear rolling bearing supports

Experimental Verification and Nonlinear Dynamic Response Analysis of a Rolling Element Bearing with Localized Defects

Nonlinear response analysis for a dual-rotor system supported by ball bearing