Abstract:Rolling element bearings are one of the key components of many rotating machines. Through condition monitoring and vibration analysis of bearings, valuable information about the health status of the machine can be obtained, such as detection of a local fault, unbalance, and misalignment. For more than three decades, various bearing dynamic models have been developed by researchers to simulate the acceleration signal of the bearing and enhance the understanding of bearing vibration response in case of having local defects. Nevertheless, recent studies have shown that measurement of local strain in the bearing can be more effective in fault diagnosis of bearings since local strain signal is less subjected to surrounding noise and non-fault interferences. However, previously developed dynamic models lack a deep study on simulating strain signals at different locations in a bearing. Therefore, this paper presents the result of a combined lumped parameter and finite element models (FEMs) for simulating strain signals of a cylindrical roller bearing in healthy and defective conditions. Contrary to previous combined dynamic models, more realistic modeling assumptions are adopted, such as applying contact pressure to the raceway rather than concentrated nodal forces. The contact pressures are obtained from the lumped parameter model and exported to the FEM for transient analysis. The accuracy of the model in generating stress distribution is validated by a static 2D finite element contact model and theoretical formulas. Dynamic responses of the bearing, such as strain changes at different locations, are investigated in the time and frequency domains to investigate the fault symptoms such as sharp impulses and amplitude modulation. Lastly, the effect of a transmission path on strain measurement and using residual strain signal for fault diagnosis are discussed. Overall, the proposed model is an effective method for strain simulation of healthy and defective roller bearings.

Model for dynamic characteristics produced by inner race local defect in ball bearing system and its simulation

Dynamic Behavior Analysis of a Rotor-Bearing-Squeeze Film Damper Coupling System with Bearing Outer Race Localized Defect

Dynamic Analysis of Double-Row Self-Aligning Ball Bearings Due to Applied Loads, Internal Clearance, Surface Waviness and Number of Balls

Multiple-degree-of-freedom dynamic model of rolling bearing with a localized surface defect

Fault Dynamic Modeling and Characteristic Parameter Simulation of Rolling Bearing with Inner Ring Local Defects

Dynamic modeling considering time-varying contact pairs and parameterized defects of deep groove ball bearings for its vibration characteristic analysis

Dynamic simulation of a cylindrical roller bearing with a local defect by combining finite element and lumped parameter models

Dynamic Modeling and Simulation of Inter-Shaft Bearings with Localized Defects Excited by Time-Varying Displacement

Dynamic modeling and force-vibration mapping mechanism construction of rolling bearings considering cage flexibility and local faults

Modeling of a deep-groove ball bearing with waviness defects in planar multibody system

Fault dynamic modeling for cylindrical roller bearings considering cage fracture and raceway defects

Dynamic modeling and vibration analysis of double row cylindrical roller bearings with irregular-shaped defects

Contact characteristic and vibration mechanism of rolling element bearing in the process of fault evolution

Experimental Verification and Nonlinear Dynamic Response Analysis of a Rolling Element Bearing with Localized Defects

Simulation of rail wheel axle bearing vibration due to local damages on outer races

Dynamic characteristics of high-speed angular contact ball bearings considering the coupling of outer race waviness and local defects

The Effect of Fit Clearance between Outer Race and Housing on Vibration Characteristics of a Cylindrical Roller Bearing with Localized Defects

Modeling a non-ideal rolling ball bearing joint with localized defects in planar multibody systems

Behaviour of an Angular Contact Ball Bearing with Three-Dimensional Cubic-Like Defect: A Comprehensive Non-Linear Dynamic Model for Predicting Vibration Response

Simulation and Experimental Analysis of Rolling Element Bearing Fault in Rotor-Bearing-casing System

Mechanism and Method for Outer Raceway Defect Localization of Ball Bearings