Abstract:Purpose This study aims to investigate the causes of leakage in radial oil seals under dynamic eccentricity, elucidate the influence of operating parameters on leakage failure and develop methods for predicting and preventing such leakage. Design/methodology/approach Based on the principle of cam motion and considering viscoelasticity, develops a motion model of the compression and release of the shaft seal and proposes a method to determine its failure. In addition, this study quantifies the leakage gap and formulates a quantitative calculation model to accurately determine the location and shape parameters of the leakage gap. Findings Leakage gaps predominantly occur during the release phase of the shaft seal. Their presence can be identified by comparing the descending times of the seal and the shaft during this phase. An increase in rotation speed and eccentricity heightens the likelihood of gap formation, with both the dimensions and leakage rate of the gap increasing as these factors escalate. Eccentricity, in particular, has a more pronounced effect on gap formation. Originality/value This study clarifies the failure mechanisms of radial oil seals under dynamic eccentricity and introduces a criterion for identifying leakage gaps, providing valuable theoretical guidance for the design and optimization of radial oil seals. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0192/.

Axisymmetric dynamic model and seal behavior analysis of mechanical seals during startup and shutdown operation

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

Experimental Study on Dynamic Sealing Performance under High Pressure and High Speed

Research on Diagnosis Method of Heavy-Pressure and High-Speed Dynamic Sealing Fault Based on Layer Support Vector Machine

Transient dynamic analysis and experimental verification on lubrication regime transition during startup period of non-contacting mechanical seal in liquid oxygen turbopump

An Eccentric 3-D Fluid-Structure Interaction Model for Investigating the Effects of Rod Parallel Offset on Reciprocating-Seal Performance

Investigation into the Influence of Stretching on Reciprocating Rod Seals Based on a Novel 3-D Model Vs Axisymmetric Model

Mechanism of a wavy-tilt-dam mechanical seal under different working conditions

Transient CFD Simulation on Dynamic Characteristics of Annular Seal under Large Eccentricities and Disturbances

Study on the wear characteristics of hydrodynamic seals during start-up based on cross-scale contact mechanics

Numerical Modeling of Dynamic Sealing Behaviors of Spiral Groove Gas Face Seals

A model for breakaway distance and maximum static friction to study the static frictional behavior of the secondary seal in non-contacting mechanical seals

Fluid-structure interaction analysis on turbulent annular seals of centrifugal pumps during transient process

Analysis of the coupling mechanism of the dynamic response and mechanical-thermal deformation in mechanical seals

A Numerical Study on Mechanical Seal Dynamic Characteristics Within a Reactor Coolant Pump

A study on radial oil seal leakage failure due to viscoelasticity under dynamic eccentricity

Transient Response and Rub-Impact Phenomenon of Liquid Lubricated Non-Contacting Mechanical Seals During External Pressure Fluctuation

Numerical Simulation Model of Reciprocating Rod Seal Systems with Axial Wear Texture on Rod Surface

Investigation on the Dynamic Characteristics for High-Speed Mechanical Seal Considering Turbulent Cavitating Flow and Inertia Effect

Dynamic Characteristic Analysis of the Shallow Slot-Split Floating Ring Seal

Effect of Disturbances on the Dynamic Performance of A Wavy-Tilt-Dam Mechanical Seal