Abstract:Elastohydrodynamic lubrication characteristics of hydraulic reciprocating seals have significant effects on sealing and tribology performances of hydraulic actuators, especially in high parameter hydraulic systems. Only elastic deformations of hydraulic reciprocating seals were discussed, and hydrodynamic effects were neglected in many studies. The physical process of the fluid-solid interaction effect did not be clearly presented in the existing fluid-solid interaction models for hydraulic reciprocating O-ring seals, and few of these models had been simultaneously validated through experiments. By exploring the physical process of the fluid-solid interaction effect of the hydraulic reciprocating O-ring seal, a numerical fluid-solid interaction model consisting of fluid lubrication, contact mechanics, asperity contact and elastic deformation analyses is constructed with an iterative procedure. With the SRV friction and wear tester, the experiments are performed to investigate the elastohydrodynamic lubrication characteristics of the O-ring seal. The regularity of the friction coefficient varying with the speed of reciprocating motion is obtained in the mixed lubrication condition. The experimental result is used to validate the fluid-solid interaction model. Based on the model, The elastohydrodynamic lubrication characteristics of the hydraulic reciprocating O-ring seal are presented respectively in the dry friction, mixed lubrication and full film lubrication conditions, including of the contact pressure, film thickness, friction coefficient, liquid film pressure and viscous shear stress in the sealing zone. The proposed numerical fluid-solid interaction model can be effectively used to analyze the operation characteristics of the hydraulic reciprocating O-ring seal, and can also be widely used to study other hydraulic reciprocating seals.

Analysis of the coupling mechanism of the dynamic response and mechanical-thermal deformation in mechanical seals

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Investigation Into The Performance Of The Vl Seal Based On The 3d Model

Thermal Fluid-Solid Interaction Model and Experimental Validation for Hydrostatic Mechanical Face Seals

Analytical and Experimental Method of Thermal Load Estimation for Seals in Transmission of Vehicle

Three-Dimensional Coupling Analysis of Flow and Thermal Performance of A Mechanical Seal

Semi-analytical Fluid-solid Coupling Model for Hydrostatic Mechanical Seals

Fluid-solid Strong-Interaction Model of Mechanical Seals in Reactor Coolant Pumps

Coupling Analysis of Frictional Heat of Fluid Film and Thermal Deformation of Mechanical Seal End Faces

Theoretical Analysis on Fluid-Structure Coupling of Hydrostatic Mechanical Seal

Study on the thermal-stress coupling simulation and surface friction of mechanical seal for water pump

Contact status between seal ring and its support: crucial factor in hydrostatic mechanical face seal

Numerical Analysis of the Traction Effect on Reciprocating Seals in the Hydraulic Actuator

Optimization design for mechanical seals in reactor coolant pumps based on a fluid-solid strong-interaction model

Study on working mechanism and performance of deep groove seal at high temperature and high speed in mixed lubrication

Mechanism of a wavy-tilt-dam mechanical seal under different working conditions

Thermo-mechanical coupling analysis of the end faces for a mechanical seal under dry friction

Axisymmetric dynamic model and seal behavior analysis of mechanical seals during startup and shutdown operation

Modeling ad Hydrodynamic Simulation of Magnetic Fluid Seal Combined with Mechanical Seal

Fluid-solid Interaction Model for Hydraulic Reciprocating O-ring Seals

Tangential contact modeling to seal considering elastic-plastic for lubrication transition mechanism