Abstract:Magnets to be used for the internal quadrupoles of an interdigital H-mode drift tube linear accelerator (IH-DTL) using KONUS beam dynamics should be both compact in size and high in focusing field gradient. Permanent magnets are an attractive solution, but then the ability to adjust the field strength is lost. We investigated two different solutions to this problem: the first using external adjustable electromagnets; the second using internal adjustable permanent magnets. The first method moves the variability out of the resonant cavity, using adjustable electromagnet quadrupole doublets before entry into the IH-DTL to compensate for the lack of internal variability. We carried out optimization simulations with custom code that ran many instances of the lorasr beam dynamics simulation software, using different values of field strength for the external doublets. By optimizing the magnet settings for different values of input current, we were able to compensate for the space-charge forces involved in accelerating a high-intensity continuous-wave (CW) deuteron beam. Second, we designed some novel adjustable permanent-magnet quadrupoles to be used inside the cavity, which combine the advantages of small cross-section and variable field gradient. This allows much more control over the beam, and even other ion species with differing charge-to-mass ratios can be accommodated within the same accelerator design. We developed two adjustable permanent-magnet designs: one with an electromagnetic component, and the other with two concentric moving rings of Halbach-array quadrupoles.

Development of a Novel High Gradient Quadrupole Magnet

Design of A Permanent Quadrupole Magnet with Adjustable Magnetic Field Gradient

Design and Optimization of Combined-Function Quadrupole-Sextupole Magnets

Variable high gradient permanent magnet quadrupole (QUAPEVA)

Design of the Combined Function Dipole-Quadrupoles (DQS) with High Gradients

Design, Fabrication and Performance Test of SHINE Superconducting Quadrupole Magnets

Design Methods of the Spherical Quadrupole Magnets and Sextupole Magnets

Design of a High-Homogeneity 55 T Pulsed Magnet for High-Resolution Nuclear Magnetic Resonance Measurements

Magnetic design study of coil-dominated superconducting quadrupole magnets based on racetrack coils

Structure Design and Analysis of Canted-Cosine-Theta (CCT) Superconducting Quadrupole Magnet

Design and Development of a Scanning Magnet for High-Resolution Mass Spectrometry

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design

Design Study of Combined Magnet with Combined Function Method

Development of short prototype of dual aperture quadrupole magnet for CEPC ring

The Development of Magnetic Field Measurement System for Drift-Tube Linac Quadrupole

Design of the Magnets of the HALS Project

Measurements of the Integrated Gradient for Halbach-type Permanent Magnet Quadrupoles

Electromagnetic Design Study of a 20-T Cos-Theta 2-in-1 Dipole Magnet for High-Energy Accelerators

Modelling and design of permanent magnet multipoles for beam transport and focusing. II. Configuring the quad

Design Of Shared Instruments To Utilize Simulated Gravities Generated By A Large-Gradient, High-Field Superconducting Magnet

In Situ Characterisation of Permanent Magnetic Quadrupoles for focussing proton beams