Abstract:The National Synchrotron Radiation Laboratory is planning to build a 2.2 GeV diffraction-limited storage ring, the Hefei Advanced Light Facility (HALF), with a 6BA lattice structure and a large number of longitudinal gradient bends (LGBs). In order to increase the radiated photon energy to the hard X-ray band and to reduce the natural emittance, a superconducting longitudinal gradient bend (SLGB) magnet is planned to be used on HALF in the future, which requires a magnetic field integral of 0.40 T center dot m over a length of 0.46 m and a peak field of about 5 T. A SLGB has many structural parameters, such as the geometric parameters of the superconducting coils and the thickness of the yoke, etc. Their influence on the magnetic field distribution has been studied, although the computation of the 3D magnet model is very slow. Considering the longitudinal field variation, the vertical gap limitation, the field homogeneity requirement and the critical current of the superconducting wire, a method is developed to simplify the 3D magnet simulation by a corresponding 2D model, so that the longitudinal magnetic field profile of a 3D model can be approximately calculated in a 2D model with faster speed. Due to the faster calculation speed of 2D models, a Mathematica-based optimization program is developed and relatively good structural parameters for the HALF SLGB are found by the program. The simulation results show that the physical design requirements can be well met. The electromagnetic design for the HALF SLGB magnet is based on the current ???? level of NbTi superconductor due to its excellent mechanical performance.

Design Study of Combined Magnet with Combined Function Method

Design of the Magnets of the HALS Project

Design of A Permanent Quadrupole Magnet with Adjustable Magnetic Field Gradient

The Magnet Design for the HLS Storage Ring Upgrade Project

Status of Multipole Magnets for Hefei Advanced Light Facility

Electromagnetic design study of a superconducting longitudinal gradient bend magnet based on the HALF storage ring

Preliminary Study On Measurement Of Magnetic Center Of Quadrupoles Using Quadrupole Shunt For Hefei Storage Ring

Development of a Novel High Gradient Quadrupole Magnet

Design Methods of the Spherical Quadrupole Magnets and Sextupole Magnets

Magnetic design study of coil-dominated superconducting quadrupole magnets based on racetrack coils

Design Optimization of Combined Function Accelerator Magnet Using Truncated Singular Value Decomposition

Design of the Combined Function Dipole-Quadrupoles (DQS) with High Gradients

Octupole magnets design for Hefei light source storage ring

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design

Development of short prototype of dual aperture quadrupole magnet for CEPC ring

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Coupling Design of Combined Function Bending Magnet and High Current Electron Beam for 100 Kw Irradiation Accelerator

The Magnet Design of the Ssrf Storage Ring and Booster

Design, Fabrication and Performance Test of SHINE Superconducting Quadrupole Magnets

Optimized Design and Electromagnetic-Thermal- Mechanical Analysis of a Toroidal D-Shaped Superconducting Magnet in 5 MW LIQHY-SMES System

Optimum Design Method of the Modified Quadrupole Magnet for the Magnetic StereoTaxis System