Abstract:Magnets to be used for the internal quadrupoles of an interdigital H-mode drift tube linear accelerator (IH-DTL) using KONUS beam dynamics should be both compact in size and high in focusing field gradient. Permanent magnets are an attractive solution, but then the ability to adjust the field strength is lost. We investigated two different solutions to this problem: the first using external adjustable electromagnets; the second using internal adjustable permanent magnets. The first method moves the variability out of the resonant cavity, using adjustable electromagnet quadrupole doublets before entry into the IH-DTL to compensate for the lack of internal variability. We carried out optimization simulations with custom code that ran many instances of the lorasr beam dynamics simulation software, using different values of field strength for the external doublets. By optimizing the magnet settings for different values of input current, we were able to compensate for the space-charge forces involved in accelerating a high-intensity continuous-wave (CW) deuteron beam. Second, we designed some novel adjustable permanent-magnet quadrupoles to be used inside the cavity, which combine the advantages of small cross-section and variable field gradient. This allows much more control over the beam, and even other ion species with differing charge-to-mass ratios can be accommodated within the same accelerator design. We developed two adjustable permanent-magnet designs: one with an electromagnetic component, and the other with two concentric moving rings of Halbach-array quadrupoles.

Design of the Combined Function Dipole-Quadrupoles (DQS) with High Gradients

A Volumetric Finite-Difference Method for the Design of Three-Dimensional, Arbitrary-Structured MRI Gradient Coil.

Design and Optimization of Combined-Function Quadrupole-Sextupole Magnets

Development of a Novel High Gradient Quadrupole Magnet

Structure Design and Analysis of Canted-Cosine-Theta (CCT) Superconducting Quadrupole Magnet

Design of the Magnets of the HALS Project

Equivalent Magnetic Dipole Method For Designing Gradient Coils Of The Halbach Magnetic Resonance Device

Design Study of Combined Magnet with Combined Function Method

Magnetic design study of coil-dominated superconducting quadrupole magnets based on racetrack coils

Design of A Permanent Quadrupole Magnet with Adjustable Magnetic Field Gradient

Design Methods of the Spherical Quadrupole Magnets and Sextupole Magnets

Design Multiple-Layer Gradient Coils Using Least-Squares Finite Element Method

Electromagnetic Design Study of a 20-T Cos-Theta 2-in-1 Dipole Magnet for High-Energy Accelerators

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design

2-D Mechanical Design Study of A 20-T Two-In-One Common-Coil Dipole Magnet for High-Energy Accelerators

Multipole Magnets for the HIAF Fragment Separator Using the Canted-Cosine-Theta (CCT) Geometry

Design of the Gradient Dipole Magnet for LLICTF

Linear Quadrupoles with Added Hexapole Fields

Design of a CW BISOL RFQ for Three Kinds of High-Charge-State Ions Simultaneous Acceleration

Development of short prototype of dual aperture quadrupole magnet for CEPC ring

Magnetic Design Study of the High-Field Common-Coil Dipole Magnet for High-Energy Accelerators