Abstract:R&D of high field accelerator magnets is ongoing at the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS) for pre-study of the next-generation high energy colliders like Super Proton-Proton Collider (SPPC), Future Circular Collider (FCC) and etc. A 12.47-T main field at 4.2 K has been attained in 2021 within two 14-mm apertures of LPF1-U, a superconducting model dipole magnet with Nb 3 Sn & NbTi combined common-coil configuration. Based on the experiences mastered in the LPF1 series magnets, a 16-T high field dipole magnet named LPF3 has been designed, fabricated and is in the performance test process. LPF3 is also a combined magnet with six racetrack Nb 3 Sn coils outside, expected to provide a 13-T main field within two 50-mm apertures, and with inserted HTS coils to enhance the field up to 16 T or even higher. The 13-T Nb 3 Sn dipole magnet, named LPF3-LTS, incorporates a graded common-coil configuration to enhance superconductor efficiency. The optimization of coil layouts includes varying bending radii (BR) and lengths of straight sections (LSS) to mitigate field accumulation in the outer four coils near the central posts and coil ends, respectively. Several Rutherford cables over 200 meters were fabricated for the coils winding, and with the maximum strands count of 42. The support structure for LPF3-LTS has adopted a shell-based design, with an improved “Bladder & Key” technology. Dedicated hydraulic pistons were investigated and utilized to replace the traditional bladders. The main design characteristics, fabrication process and some preliminary test results of the magnet are presented in this paper.

Design Optimization of Combined Function Accelerator Magnet Using Truncated Singular Value Decomposition

Optimization and D esign of M ulti-ring

3-D Optimal Shape Design of Pole Piece in Permanent Magnet Mri Using Parameterized Nonlinear Design Sensitivity Analysis

Optimization and Design of Multi-ring Pole Pieces for Small-sized Permanent Magnetic Resonance Imaging Magnet

Numerical Optimization of Electromagnet Current Distribution in Superconducting Linear Acceleration System

Permanent-magnet Quadrupoles for an Interdigital H-mode Drift Tube Linear Accelerator: Optimization Code and Adjustable Magnet Design

Design Study of Combined Magnet with Combined Function Method

Design of A Permanent Quadrupole Magnet with Adjustable Magnetic Field Gradient

Optimal Design of HTS Main Split Magnet for 240mev Proton Cyclotron Accelerator

Design of the Combined Function Dipole-Quadrupoles (DQS) with High Gradients

Status of Multipole Magnets for Hefei Advanced Light Facility

Modelling and design of permanent magnet multipoles for beam transport and focusing. II. Configuring the quad

Magnet design optimization of a 100 MeV separated sector medical cyclotron and its injection line

Modelling and design of permanent magnet multipoles for beam transport and focusing. I. Selection of optimal design and parameters

The Application Of Toolkit Of Optimization In Designs Of Accelerator Magnets

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

A Homogeneous Superconducting Magnet Design Using A Hybrid Optimization Algorithm

Analytic Modeling Optimal Control With Kinetic Inductance Fine Turning Method of Pulsed Power Supply for Accelerator Magnet

Improved stellarator permanent magnet designs through combined discrete and continuous optimizations

Optimized Design Considerations for Hybrid Undulator

Coupling Design of Combined Function Bending Magnet and High Current Electron Beam for 100 Kw Irradiation Accelerator