Abstract:High-temperature superconducting (HTS) materials hold great promise for advancing large-scale high-field magnets. This article presents a comprehensive study on the design, fabrication, and performance evaluation of stacked HTS cable-in-conduit conductors (CICCs) for a prospective 55 T hybrid magnet, conducted through finite element modeling. The CICC configuration features a central copper core surrounded by straight-slotted channels filled with solder and Rare-Earth Barium Copper Oxide tapes, encased in copper and stainless steel jackets. Key aspects investigated include critical current characteristics, stress-strain, bending behaviors, and thermal performance of the stacked HTS CICCs. Critical current evaluation and tensile/compressive stress at 77 and 4.2 K self-fields, along with analysis of responses to varying magnetic induction intensities and orientations, is conducted. Strain distribution in the conductor at different bending radii and temperature distribution along the conductor under various cooling processing are analyzed. The study involves numerical modeling of conductor behavior under diverse magnetic fields, mechanical loading conditions, and thermal environments. In addition, critical current analysis, strain distribution assessment, and cooling performance evaluation offer valuable insights into the operational capabilities of the conductor. The model evaluates electromagnetic, mechanical, and low-temperature properties of the stacked HTS CICC, suggesting its suitability for HTS coils within large-scale magnets following optimization. These findings offer insights crucial for designing and optimizing CICCs for high-field magnet applications.

Conceptual Mechanical Structure Analysis of A 16 T Canted Cosine Theta (CCT) Magnet

Structure Design and Analysis of Canted-Cosine-Theta (CCT) Superconducting Quadrupole Magnet

2-D Mechanical Design Study of A 20-T Two-In-One Common-Coil Dipole Magnet for High-Energy Accelerators

20-T Dipole Magnet with Common-Coil Configuration: Main Characteristics and Challenges

Structural Analysis of a 4-Layer Curved Alternating Gradient Canted-Cosine-Theta Magnet Applied for Light-Weight Gantry

3D Mechanical Design and Stress Analysis of 20 T Common-Coil Dipole Magnet for SppC

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Mechanical Design of FECD1 at IHEP: a 12-T Hybrid Common-coil Dipole Magnet

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

Magnetic Design Study of the High-Field Common-Coil Dipole Magnet for High-Energy Accelerators

R&D Steps of a 12-T Common Coil Dipole Magnet for SPPC Pre-study

Design of a Curved Canted-Cosine-Theta Superconducting Magnet for a Laser Proton Radiotherapy System

A Framework for the Magnetic Design of Large Bore, Curved AG-CCT Magnets for Proton Therapy Facilities

Electromagnetic and Mechanical Analysis of DC Magnet for Super X Test Facility

Conceptual Design Study of Iron-Based Superconducting Dipole Magnets for SPPC

20 T Dipole Magnet Based on Hybrid HTS/LTS Cos-Theta Coils with Stress Management

Study on Normal Bending Characteristics of Aluminium-Stabilized Stacked HTS Tape Cable for CEPC Detector Magnet

Magnetic Design Of An Alternating Gradient Canted-Cosine-Theta Superconducting Magnet For Proton Therapy

Design and Test of a Half-Aperture Canted-Cosine-Theta Multipole Prototype Magnet for the HIAF FRagment Separator

Modeling of the Stacked High-Temperature Superconducting Cable-in-Conduit Conductor for High-Field Magnet Applications

Coil Error Analysis of a Curved Canted-Cosine-Theta Magnet Applied to a Superconducting Gantry