Abstract:The National Synchrotron Radiation Laboratory is planning to build a 2.2 GeV diffraction-limited storage ring, the Hefei Advanced Light Facility (HALF), with a 6BA lattice structure and a large number of longitudinal gradient bends (LGBs). In order to increase the radiated photon energy to the hard X-ray band and to reduce the natural emittance, a superconducting longitudinal gradient bend (SLGB) magnet is planned to be used on HALF in the future, which requires a magnetic field integral of 0.40 T center dot m over a length of 0.46 m and a peak field of about 5 T. A SLGB has many structural parameters, such as the geometric parameters of the superconducting coils and the thickness of the yoke, etc. Their influence on the magnetic field distribution has been studied, although the computation of the 3D magnet model is very slow. Considering the longitudinal field variation, the vertical gap limitation, the field homogeneity requirement and the critical current of the superconducting wire, a method is developed to simplify the 3D magnet simulation by a corresponding 2D model, so that the longitudinal magnetic field profile of a 3D model can be approximately calculated in a 2D model with faster speed. Due to the faster calculation speed of 2D models, a Mathematica-based optimization program is developed and relatively good structural parameters for the HALF SLGB are found by the program. The simulation results show that the physical design requirements can be well met. The electromagnetic design for the HALF SLGB magnet is based on the current ???? level of NbTi superconductor due to its excellent mechanical performance.

Structural Analysis of a 4-Layer Curved Alternating Gradient Canted-Cosine-Theta Magnet Applied for Light-Weight Gantry

Coil Error Analysis of a Curved Canted-Cosine-Theta Magnet Applied to a Superconducting Gantry

Conceptual Mechanical Structure Analysis of A 16 T Canted Cosine Theta (CCT) Magnet

Magnetic Design Of An Alternating Gradient Canted-Cosine-Theta Superconducting Magnet For Proton Therapy

Structure Design and Analysis of Canted-Cosine-Theta (CCT) Superconducting Quadrupole Magnet

A Framework for the Magnetic Design of Large Bore, Curved AG-CCT Magnets for Proton Therapy Facilities

AC loss and thermal analysis of a curved DCT super-conducting magnet for carbon ion therapy

Design of a Superconducting Gantry Dipole Magnet Based on Tilted Solenoids

Design of a Curved Canted-Cosine-Theta Superconducting Magnet for a Laser Proton Radiotherapy System

Structural analysis of CR superconducting dipole magnet in FAIR project

Stress Analysis of a 7 T Actively Shielded Superconducting Magnet for Animal MRI

Numerical analysis on the mechanical behavior of a 5T superconducting magnet

Electromagnetic design study of a superconducting longitudinal gradient bend magnet based on the HALF storage ring

Design of a Large Momentum Acceptance Proton Therapy Gantry Utilizing AG-CCT Magnets

Design and heat load analysis of support structure of CR superconducting dipole magnet for FAIR

Deformation Calculation and Optimal Design of the Compact Magnet for CYCIAE-100

Study on internal strain distribution of the high-field Nb3Sn superconducting accelerator magnets with homogenization theory

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

MOGA Optimization of Superconducting Longitudinal Gradient Bend Based on NbTi Wire

Analytical Magnetic Field Analysis and Prediction of Cogging Force and Torque of a Linear and Rotary Permanent Magnet Actuator