Abstract:Heavy ion collision is an unique method for studying cold and dense nuclear matter in labs. The Cooling Storage Ring (CSR) External-target Experiment (CEE) at the Heavy Ion Research Facility in Lanzhou (HIRFL), China, is the first multi-purpose nuclear physics experimental device to operate in the GeV energy range. One of the key parts is a large acceptance dipole magnet, which is used to bend particles so that they can be detected by various detectors. A superconducting coil with the size of 3.1 m ×3.6 m × 2 m was designed to verify the rationality of the scheme. Although the coil-dominated superconducting magnet with NbTi has been used to reduce the weight and size of the magnet, large deformation and stress will occur in the cooldown and excitation stages owing to the large volume and weight. Therefore, it is crucial to design a reasonable structure to ensure the strength of the magnet and prevent the magnet from interfering with other components due to large deformation, and even the possibility of quenching. A truss supporter is proposed for the support of the superconducting coil. In this study, the structural design of the cold mass of a superconducting magnet is introduced, and its mechanical behaviors during cooldown and excitation are analyzed in detail. To verify the feasibility of the coil design and process route, a sub-size prototype was manufactured and tested at 4.2 K and reached the design current successfully.

Structure Design and Analysis of Canted-Cosine-Theta (CCT) Superconducting Quadrupole Magnet

Conceptual Mechanical Structure Analysis of A 16 T Canted Cosine Theta (CCT) Magnet

Multipole Magnets for the HIAF Fragment Separator Using the Canted-Cosine-Theta (CCT) Geometry

Magnetic design study of coil-dominated superconducting quadrupole magnets based on racetrack coils

Design and Test of a Half-Aperture Canted-Cosine-Theta Multipole Prototype Magnet for the HIAF FRagment Separator

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Structural Analysis of a 4-Layer Curved Alternating Gradient Canted-Cosine-Theta Magnet Applied for Light-Weight Gantry

Coil Error Analysis of a Curved Canted-Cosine-Theta Magnet Applied to a Superconducting Gantry

Design of a Curved Canted-Cosine-Theta Superconducting Magnet for a Laser Proton Radiotherapy System

2-D Mechanical Design Study of A 20-T Two-In-One Common-Coil Dipole Magnet for High-Energy Accelerators

Magnetic Design Of An Alternating Gradient Canted-Cosine-Theta Superconducting Magnet For Proton Therapy

3D Mechanical Design and Stress Analysis of 20 T Common-Coil Dipole Magnet for SppC

A Framework for the Magnetic Design of Large Bore, Curved AG-CCT Magnets for Proton Therapy Facilities

Mechanical Behavior of a 16-T FCC Dipole Magnet During a Quench

AC loss and thermal analysis of a curved DCT super-conducting magnet for carbon ion therapy

Magnetic Design Study of the High-Field Common-Coil Dipole Magnet for High-Energy Accelerators

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

20-T Dipole Magnet with Common-Coil Configuration: Main Characteristics and Challenges

Structural analysis of superconducting dipole prototype for HIAF

Design and Optimization of Combined-Function Quadrupole-Sextupole Magnets