Abstract:Nuclear magnetic resonance Spectrometer and nuclear magnetic resonance imaging are the main applications of high field superconducting magnets.Because the high-field superconducting magnets usually have a high magnetic field and operating current,the superconducting wire will withstand higher electromagnetic stress during the operation.So that the critical characteristics of wire will be degraded,the stability of the magnet will be affected.It is necessary to carry out the precise analysis of the electromagnetic stress of the high field superconducting magnet.In this paper,a fast and effective finite element analysis method is developed.The first step is to establish the average finite element model for the whole superconducting magnet system.The traditional electromagnetic-structural coupling method is used to solve the electromagnetic stress and obtain the maximum stress position.In the second step,a detailed finite element model is established for the superconducting coil where the maximum stress is located.The single integral-structure analysis method is used to accurately solve the electromagnetic stress in each component.Based on this model,the electromagnetic stress of 500 MHz NMR superconducting magnet was studied.The analytical method can also be used for thermal stress analysis of superconducting magnets during cooling which can provide useful theoretical suggestions for the design and construction of high field superconducting magnets.

Structural analysis of superconducting dipole prototype for HIAF

Preliminary Design of Superconducting Dipole Coils for HIAF in IMP

The Fast-Pulsed Superconducting Dipole Prototype Magnet of HIAF at IMP

Superconducting Magnet Development for the HIAF Accelerator Complex

Design and heat load analysis of support structure of CR superconducting dipole magnet for FAIR

Structural analysis of CR superconducting dipole magnet in FAIR project

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Design and Test of a Half-Aperture Canted-Cosine-Theta Multipole Prototype Magnet for the HIAF FRagment Separator

Magnetic Design Study of the High-Field Common-Coil Dipole Magnet for High-Energy Accelerators

Collaborative Simulation and Testing of the Superconducting Dipole Prototype Magnet for the FAIR Project

Preliminary study on structural stability of the prototype superconducting dipole magnet for FAIR

Structure Design and Analysis of Canted-Cosine-Theta (CCT) Superconducting Quadrupole Magnet

Electromagnetic and Mechanical Analysis of DC Magnet for Super X Test Facility

Mechanical Design, Assembly and Strain Measurement Results of a 13-T Superconducting Dipole Magnet

2-D Mechanical Design Study of A 20-T Two-In-One Common-Coil Dipole Magnet for High-Energy Accelerators

Analysis of Mechanical Stress and Magnetic Field in Nuclotron Dipole Magnet for GSI Accelerator

STRUCTURAL DESIGN AND ANALYSIS FOR A DOUBLE-BAND COLD MASS SUPPORT OF MICE COUPLING MAGNET

Thermo-mechanical Analysis of the Structure Components of 15 T Magnet in Super-X Facility

Multipole Magnets for the HIAF Fragment Separator Using the Canted-Cosine-Theta (CCT) Geometry

Mechanical Design of FECD1 at IHEP: a 12-T Hybrid Common-coil Dipole Magnet

Finite Element Analysis Method for Electromagnetic Stress of Axisymmetric High Field Superconducting Magnet