Abstract:The superconducting magnet group at IHEP (the Institute of High Energy Physics, Chinese Academy of Sciences, China) has been engaging in the R&D of high field accelerator magnets since 2014 for the pre-study of the next-generation high energy particle accelerators like CEPC-SPPC (Circular Electron Positron Collider-Super Proton Proton Collider), FCC (Future Circular Collider), etc. A superconducting model dipole magnet named LPF1 was first fabricated with NbTi and Nb3Sn in a combined common-coil configuration in 2017 and tested in 2018, a main field of 10.23 T was reached within two 10 mm apertures. The magnet was reassembled with higher pre-stress in 2019 to investigate the influence of the pre-stress loading level on the performance of common-coil dipole magnets. The main field of this upgraded magnet named LPF1-S was increased to 10.71 T within two 12 mm apertures. By improving the key processing technologies in Rutherford cable fabrication, coil winding, Nb3Sn & NbTi splices soldering and coil impregnation, the recently fabricated model dipole magnet named LPF1-U attained a 12.47 T main field in two 14 mm apertures in 2021. To fully take advantage of Nb3Sn and NbTi superconductors in different field regions, LPF1-U was still designed and developed with a combined coil configuration with Nb3Sn for the inner two coils and NbTi for the outer four coils. Additionally, graded coil topology and different coil LSS (length of straight section) settings were adopted in the optimization of LPF1-U layouts. Bladder and key technology was used for the support structure, and fiber optic sensors based on FBG (fiber Bragg grating) were utilized to monitor the stress distribution and variation in the structures and coils through the whole process from magnet assembly to cool-down and excitation. During the performance test, a relatively large number of trainings were carried out and LPF1-U became more stable after the thermal cycle. A peak field of 12.7 T in the coils (12.47 T main field in apertures) corresponds to an operating current of 6865 A and a load line ratio of 90% was finally attained. It is worth mentioning that LPF1-U is the first hybrid-Nb3Sn, NbTi-common coil dipole magnet that has achieved a main field of more than 12 T in two apertures. The design, fabrication and performance analysis of the LPF series dipole magnets are presented in this paper.

The design of B1APF dipole for the EIC

Development and Test of a Large-aperture Nb3Sn Cos-theta Dipole Coil with Stress Management

Large-Aperture High-Field NB3SN Magnets for the 2nd EIC Interaction Region*

Structural analysis of superconducting dipole prototype for HIAF

Results from a Prototype Permanent Magnet Dipole-Quadrupole Hybrid for the PEP-II B-Factory

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

eRHIC Design Study: An Electron-Ion Collider at BNL

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Snowmass 2021 White Paper: Electron Ion Collider for High Energy Physics

Development and Status of the FRIB 28 GHz SC ECRIS

Development of Superconducting Model Dipole Magnets Beyond 12 T with a Combined Common-Coil Configuration

Research and development of the high precision low field dipole magnet for CEPC Booster

High-Intensity Proton RFQ Accelerator Fabrication Status for PXIE

eRHIC - A precision electron-proton/ion collider facility at Brookhaven National Laboratory

eRHIC Detector Design Studies - Implications and Constraints on the ep (A) Interaction-Region Design

Design of 11.8 MHZ Buncher for Isac at Triumf

eRHIC - Accelerator and detector design studies

Polarized internal target experiments based on EIC beams

Design and construction of the dipole magnet of the space plasma environment research facility (SPERF) for simulating the earth magnetosphere

The Cornell-BNL FFAG-ERL Test Accelerator: White Paper

Latest vertex and tracking detector developments for the future Electron-Ion Collider