Abstract:The National Synchrotron Radiation Laboratory is planning to build a 2.2 GeV diffraction-limited storage ring, the Hefei Advanced Light Facility (HALF), with a 6BA lattice structure and a large number of longitudinal gradient bends (LGBs). In order to increase the radiated photon energy to the hard X-ray band and to reduce the natural emittance, a superconducting longitudinal gradient bend (SLGB) magnet is planned to be used on HALF in the future, which requires a magnetic field integral of 0.40 T·m over a length of 0.46 m and a peak field of about 5 T. A SLGB has many structural parameters, such as the geometric parameters of the superconducting coils and the thickness of the yoke, etc. Their influence on the magnetic field distribution has been studied, although the computation of the 3D magnet model is very slow. Considering the longitudinal field variation, the vertical gap limitation, the field homogeneity requirement and the critical current of the superconducting wire, a method is developed to simplify the 3D magnet simulation by a corresponding 2D model, so that the longitudinal magnetic field profile of a 3D model can be approximately calculated in a 2D model with faster speed. Due to the faster calculation speed of 2D models, a Mathematica-based optimization program is developed and relatively good structural parameters for the HALF SLGB are found by the program. The simulation results show that the physical design requirements can be well met. The electromagnetic design for the HALF SLGB magnet is based on the current J C level of NbTi superconductor due to its excellent mechanical performance.

Coil Error Analysis of a Curved Canted-Cosine-Theta Magnet Applied to a Superconducting Gantry

Magnet circuit design and optimization of giant magnetostrictive transducer

Finite Element Analysis of Gradient Z-Coil Induced Eddy Currents in a Permanent MRI Magnet

Conceptual Mechanical Structure Analysis of A 16 T Canted Cosine Theta (CCT) Magnet

AC loss and thermal analysis of a curved DCT super-conducting magnet for carbon ion therapy

Design and Analysis of Superconducting Magnets of a New Mixed Maglev Model

Analysis of magnetization induced error field in superconducting magnets

Design study of a superconducting gantry for carbon beam therapy

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Design of Superconducting Shim Coils for an Open Bipanar Mri System Using Ibem

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

An Advanced Computational Approach for Evaluating Screening-Current-Induced Strain in REBCO HTS Coils Considering Electromagnetic-Mechanical Coupling

Electromagnetic Design Study of a Superconducting Longitudinal Gradient Bend Magnet Based on the HALF Storage Ring

Stress Analysis of a 7 T Actively Shielded Superconducting Magnet for Animal MRI

Structural optimization design and numerical analysis of in-vessel magnetic compression coils

A General Model for Simulating the Quench Behavior of Canted-Cosine-theta (CCT) Quadrupole Magnets

Magnetoelastic Bending and Buckling of Three-Coil Superconducting Partial Torus

Producing circular field harmonics inside elliptic magnet apertures with superconducting canted-cosine-theta coils

Magneto-Mechanical Coupling Analysis of a Superconducting Solenoid Magnet in Self-Magnetic Field

Beamline Analysis for a Laser-Driven Proton Therapy Accelerator Using Superconducting Bends