Abstract:The superconducting magnet group at IHEP (the Institute of High Energy Physics, Chinese Academy of Sciences, China) has been engaging in the R&D of high field accelerator magnets since 2014 for the pre-study of the next-generation high energy particle accelerators like CEPC-SPPC (Circular Electron Positron Collider-Super Proton Proton Collider), FCC (Future Circular Collider), etc. A superconducting model dipole magnet named LPF1 was first fabricated with NbTi and Nb3Sn in a combined common-coil configuration in 2017 and tested in 2018, a main field of 10.23 T was reached within two 10 mm apertures. The magnet was reassembled with higher pre-stress in 2019 to investigate the influence of the pre-stress loading level on the performance of common-coil dipole magnets. The main field of this upgraded magnet named LPF1-S was increased to 10.71 T within two 12 mm apertures. By improving the key processing technologies in Rutherford cable fabrication, coil winding, Nb3Sn & NbTi splices soldering and coil impregnation, the recently fabricated model dipole magnet named LPF1-U attained a 12.47 T main field in two 14 mm apertures in 2021. To fully take advantage of Nb3Sn and NbTi superconductors in different field regions, LPF1-U was still designed and developed with a combined coil configuration with Nb3Sn for the inner two coils and NbTi for the outer four coils. Additionally, graded coil topology and different coil LSS (length of straight section) settings were adopted in the optimization of LPF1-U layouts. Bladder and key technology was used for the support structure, and fiber optic sensors based on FBG (fiber Bragg grating) were utilized to monitor the stress distribution and variation in the structures and coils through the whole process from magnet assembly to cool-down and excitation. During the performance test, a relatively large number of trainings were carried out and LPF1-U became more stable after the thermal cycle. A peak field of 12.7 T in the coils (12.47 T main field in apertures) corresponds to an operating current of 6865 A and a load line ratio of 90% was finally attained. It is worth mentioning that LPF1-U is the first hybrid-Nb3Sn, NbTi-common coil dipole magnet that has achieved a main field of more than 12 T in two apertures. The design, fabrication and performance analysis of the LPF series dipole magnets are presented in this paper.

Electromagnetic Design Study of a 20-T Cos-Theta 2-in-1 Dipole Magnet for High-Energy Accelerators

2-D Mechanical Design Study of A 20-T Two-In-One Common-Coil Dipole Magnet for High-Energy Accelerators

Magnetic Design Study of the High-Field Common-Coil Dipole Magnet for High-Energy Accelerators

20-T Dipole Magnet with Common-Coil Configuration: Main Characteristics and Challenges

Electromagnetic Design of a 12 T Twin-Aperture Dipole Magnet

Mechanical Design of FECD1 at IHEP: a 12-T Hybrid Common-coil Dipole Magnet

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

Electromagnetic Design, Fabrication and Test of LPF1:a 10.2 T Common-Coil Dipole Magnet with Graded Coil Configuration

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Research and development of the high precision low field dipole magnet for CEPC Booster

Design and Test of a Half-Aperture Canted-Cosine-Theta Multipole Prototype Magnet for the HIAF FRagment Separator

Development of Superconducting Model Dipole Magnets Beyond 12 T with a Combined Common-Coil Configuration

R&D Steps of a 12-T Common Coil Dipole Magnet for SPPC Pre-study

Coupling Design of Combined Function Bending Magnet and High Current Electron Beam for 100 Kw Irradiation Accelerator

20 T Dipole Magnet Based on Hybrid HTS/LTS Cos-Theta Coils with Stress Management

Electromagnetic and Mechanical Analysis of DC Magnet for Super X Test Facility

Conceptual Design Study of Iron-Based Superconducting Dipole Magnets for SPPC

Development of short prototype of dual aperture quadrupole magnet for CEPC ring

3D Mechanical Design and Stress Analysis of 20 T Common-Coil Dipole Magnet for SppC

Magnet Design for a 70 MeV ${\rm H}^{-}/{\rm D}^{-}$ Dual Accelerating Particle Cyclotron

Design of the Gradient Dipole Magnet for LLICTF