Grain Refinement Mechanism and Improved Mechanical Properties in Mg–Sn Alloy with Trace Y Addition
X. Y. Qian,Y. Zeng,B. Jiang,Q. R. Yang,Y. J. Wan,G. F. Quan,F. S. Pan
DOI: https://doi.org/10.1016/j.jallcom.2019.153122
IF: 6.2
2020-01-01
Journal of Alloys and Compounds
Abstract:Mg-0.5Sn-(0, 0.3 wt%) Y alloys were obtained by casting with a metal mould, then extruded to acquire the as-extruded sheets. The microstructures, and mechanical properties of the alloys were studied. The results indicated that Sn3Y5 particles generated after the addition of Y into the Mg–Sn alloys. This contributed to the presence of fine grains in the extruded Mg-0.5Sn-0.3Y sheets, the size of which decreased from ∼16 μm to ∼4 μm, accompanied by a significant improvement in the mechanical properties. Specifically, with Y addition, the ultimate tensile strength and elongation along the extrusion direction increased by 21% and 191%, respectively. The crystallographic matching relationships between Sn3Y5 and Mg were established via an edge-to-edge matching model. The calculated results illustrated that Sn3Y5 had small crystallographic misorientation with α-Mg, and served as the sites of heterogeneous nucleation for the Mg matrix, which led to grain refinement of Mg-0.5Sn-0.3Y sheets. Meanwhile, the diffraction patterns obtained by transmission electron microscopy along [0001]Mg // [112‾3‾]Sn3Y5 well agreed with the simulation results and validated the prediction. Furthermore, the macro-texture and work hardening behaviour of the extruded sheets implied that in the tensile test, the as-extruded Mg-0.5Sn-0.3Y sheets underwent both basal and prismatic slips, while only the basal slip was observed in Mg-0.5Sn. As more slip systems were activated and more mobile dislocations could be formed, this in combination with the fine-grain strengthening effect, resulted in the large tensile elongation and high tensile strength of the Mg-0.5Sn-0.3Y sheets.