Abstract:In this study, SiC/SiCN composites with BN interphase were prepared using chemical vapor infiltration (CVI) and polymer infiltration and pyrolysis (PIP) methods. The evolution and related mechanisms of mechanical and microwave absorption properties of the composites after oxidation at 800 degrees C, 1000 degrees C, 1200 degrees C, and 1400 degrees C were investigated. The results showed that with the elevating of oxidation temperature, the flexural strength of SiC/SiCN composites gradually decreased, with a retention rate of 56.7 % after oxidation at 1400 degrees C. The main reasons for the deterioration of mechanical properties were the changes in the crystal structure of SiC fibers under high-temperature conditions and the formation of brittle SiO2 phases on the surface and interior of the SiCN matrix. With the increase in oxidation temperature, the microwave absorption performance of the composites showed an enhancing trend. The main reasons were that after oxidation treatment, the reduction of free carbon content and the formation of SiO2 film layers from the oxidation of SiC and SiCN led to a decrease in the complex permittivity of the composites, resulting in better impedance matching and dielectric loss capabilities. The contributions of BN interphase to stress dispersion, interface polarization, and oxidation protection significantly enhance the mechanical and electromagnetic absorption properties of the composites. Therefore, SiC/ SiCN composites are high-temperature structural microwave absorbing materials with great application prospects.

Mechanical Properties Evolution of SiCf/SiC Composites with a BN/SiC Multilayer Interface Oxidized at Elevated Temperature

Evolution of High Temperature Oxidation Properties of SiCf/SiCN Composites with BN Interphase

Mechanical properties and microstructure evolution of KD‐SA SiCf/BN/SiC CMCs oxidized at different temperatures

Oxidation behavior of 3D SiCf/SiBCN composites at 800–1200 °C

Oxidation resistance of SiCf/SiC composites with a PyC/SiC multilayer interface at 500 °C to 1100°C

Oxidation Behavior of SiC/SiC Composites in Air at High Temperature

The Tensile Damage Behavior of SiCf/SiC Composites after Oxidation in Wet Atmosphere

Degradation mechanisms of a self-healing SiC (f) /BN (i) /[SiC-B 4 C] (m) composite at high temperature under different oxidizing atmospheres

Influence of Oxidation Damages on Mechanical Properties of SiC/SiC Composite Using Domestic Hi-Nicalon Type SiC Fibers

Oxidation Behavior Of A 2d-Sicf/Bn/Sibcn Composite At 1350-1650 Degrees C In Air

Effect of Oxidation Time on Fracture Behavior of C/SiC Composites at 800 °C in Air

The Tensile Damage Behavior of SiCf/SiC–B4C after Oxidation in Wet Atmosphere Based on Acoustic Emission Pattern Recognition

Oxidation behavior and mechanical properties of C/SiC composites with Si-MoSi2 oxidation protection coating

Oxidation Resistance of SiC/SiC Composites Containing SiBC Matrix Fabricated by Liquid Silicon Infiltration

Fracture Toughness Evolution and Failure Mechanisms of Two-Dimensional SiCf/SiC Composites at Temperatures Up to 1500 °C in Air

Oxidation behaviors of carbon fiber reinforced multilayer SiC-Si3N4 matrix composites

Oxidation Behavior of C/SiC-Ti3SiC2 at 800–1300 °C in Air

Mechanical and Oxidation Properties of C/SiC Corrugated Lattice Core Composite Sandwich Panels

Influence of an O2 Type Oxidizing Environment on SiCf/SiC Composites: Properties/Microstructure Relationship

Mechanical properties and microstructure evolution of 3D C f /SiBCN composites at elevated temperatures

Evolution of mechanical and electromagnetic interference shielding properties of C/SiC during oxidation at 700 ºC